LG Electronics LW7000ER owner manual Suggested Tool Requirements, Installation Kits Contents

WP Series

Installation Kits Contents

ENGLISH

1			2	3	4	5
6	7	8	9	10		11
15	12	13
						14

NO.	NAME OF PARTS	Q'TY
1	FRAME CURTAIN	2
2	SUPPORT BRACKET	2
3	SILL BRACKET	2
4	LOCK NUT	4
5	SCREW (TYPE A)	14
6	SCREW (TYPE B)	7
7	SCREW (TYPE C)	5
8	SCREW (TYPE D)	2
9	CARRIAGE BOLT	2
10	FOAM STRIP	1
11	FOAM SEAL	1
12	WINDOW LOCKING BRACKET	1
13	DRAIN PIPE	1
14	FOAM-PE	1
15	FRAME GUIDE	2

Suggested Tool Requirements

SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL

PREPARATION OF CHASSIS	Shipping
	Screws

1 Remove the screws which fasten the cabinet at both sides and at the back.

2 Slide the unit from the cabinet by gripping the base pan handle and pulling forward while bracing the cabinet.

3 Cut the window sash seal to the proper length.

Peel off the backing and attach the Foam-Seal to the underside of the window sash.

4	Remove the backing from the top upper guide Foam-PE
	and attach it to the bottom of the Upper Guide.
5 Attach the upper guide onto the top of the cabinet with 3
	Type A screws .			Upper guide
6	Insert the Frame Guides	into the bottom of the
	cabinet.		11
7	Insert the Frame Curtain	into the Upper Guide and	Upper guide	14
	Frame Guides .

8 Fasten the curtains to the unit with 10 Type A screws .

(Type A) 5

15	(Type A)
5

21