Medium Combustion, Slow Combustion | LG Electronics P1BRENTW-A

3.2.6 Medium Combustion

This is the recommended mode of operating the BRENTWOOD and should be the one normally used since it will deposit the least amount of creosote on the glass and in the chimney. The combustion air control must be 3/4 closed and pushed forward to close the air boost. The precise setting will depend on many factors, including chimney length and the moisture content of the wood.

For instance, a long chimney will necessitate closing the damper more. To obtain the proper combustion, close the damper completely, then open it about 1/4" to 1/2". Three medium size pieces of wood should be burning on a bed of hot coals. The heat output will be approximately 30,000 BTU per hour and the loading time will be about every 3-4 hours. Softwoods may be burned using this method but the time will be substantially reduced.

3.2.7 Slow Combustion

When the air combustion control is completely closed, the fireplace is in a slow combustion phase. If the hearth is hot enough, slow combustion will not stop the fire, but there will be a noticeable change in the flame pattern. The flames will be slow and may appear dirty if the wood is too wet (moisture content of 20% and more). Do not allow the wood to burn without flame, since this will produce excessive creosote in the unit.

Creosote may accumulate on the glass door. This method of burning should be used only after operating the BRENTWOOD with the air control opened to produce a hot fire for about an hour or at medium pace for at least 3 hours. Slow combustion can be used at night in order to reduce the heat output and to prolong the burn. The loading time will be between 6-8 hours.

3.2.8 Refuelling For Best Performance

The BRENTWOOD fireplace will operate best if attention is given to operating the unit with the damper fully opened after refuelling in order to bring the firebox and the chimney system up to their optimum operating temperature. Combustion efficiency is relative to firebox temperature. A temperature of 500º C and up, with a visible flame, in the upper part of the firebox indicates a maximum efficiency. To obtain this temperature, the fireplace must be operated with the primary air and air boost controls fully opened during 10 to 20 minutes after reloading, depending on the heat and on the moisture content of the wood. Once you have reached the desired temperature, the air boost can be closed and the primary air set to a medium setting. You know you have reached the desired temperature when, closing the primary air control, you can see a flame at the top of the firebox. The benefit of this technique will be cleaner glass, less creosoting, greater efficiency and the most pleasing fire for your enjoyment. If your fireplace is equipped with a central forced air system, make sure the central blower is turned off during reloading to avoid smoking problems.

P1BRENTW-A specifications

LG Electronics has consistently been at the forefront of technological innovation, and the P1BRENTW-A is a prime example of its commitment to quality and performance. This air conditioning unit is engineered to provide optimal indoor climate control, ensuring comfort in a variety of environments.

One of the standout features of the P1BRENTW-A is its energy-efficient design. With a high Energy Efficiency Ratio (EER), it minimizes electricity consumption while delivering powerful cooling capabilities. The unit is equipped with a dual inverter compressor, which adjusts its cooling capacity according to the temperature in the room, enhancing energy savings while maintaining a consistently comfortable temperature.

The P1BRENTW-A also boasts a variety of smart technologies that enhance user experience. Its Wi-Fi connectivity allows users to control the unit remotely through a smartphone app. This functionality means that homeowners can adjust settings, monitor energy usage, and schedule operation times even when they are not at home, all contributing to greater convenience and efficiency.

In addition, the air conditioning unit features a multi-functional air purification system. This system includes a high-efficiency particulate air (HEPA) filter that captures dust, allergens, and other particles, making the air cleaner and healthier to breathe. The inclusion of a dehumidifying function helps to maintain a balance in humidity levels, preventing excessive moisture buildup that can lead to mold growth and discomfort.

Installation of the P1BRENTW-A is made straightforward with LG's user-friendly design. It is suitable for a variety of spaces, including residential areas, office environments, and commercial spaces. The sleek and modern aesthetic of the unit ensures that it blends well with contemporary interior designs.

Moreover, the LG P1BRENTW-A is built for long-lasting durability, featuring high-quality materials that withstand the test of time. It undergoes rigorous testing to ensure reliability and performance in varying environmental conditions. Additionally, the unit includes a few operational modes, providing flexibility to users depending on their cooling or heating needs.

In summary, the LG Electronics P1BRENTW-A stands out for its energy efficiency, smart technologies, superior air purification capabilities, and user-friendly design. Whether for personal comfort or maintaining a suitable work environment, this air conditioning unit offers a well-rounded solution for modern indoor climate control needs.