Shark NV356K, NV356E, NV355, NV357 manual Component Maintenance Schedule, Emptying the Dust CUP

Page 14

Maintenance

 

 

COMPONENT

MAINTENANCE SCHEDULE

 

1

Dust Cup

Empty each time you vacuum.

 

 

 

 

 

 

2

Pre-Motor Foam Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

3

Pre-Motor Felt Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

4

Post-Motor HEPA Filter

Clean once every 2 years or as needed.

 

 

 

 

 

Fig. 20

Fig. 21

Screen

Filter

Fig. 22

EMPTYING THE DUST CUP

The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when the dust cup appears full.

1Undo the latches on the sides of the dust cup by lifting them up and outwards to remove the dust cup from the motor base. (Fig. 20)

2Hold the dust cup over a trash receptacle and press the bottom door release button. (Fig. 21) Tap gently to empty contents. Press the door shut again until it clicks.

3If needed, turn the dust cup upside down over the trash receptacle and press the top door release button. (Fig. 22) Tap gently to remove contents.

Use a dry cloth or paper towel to remove debris stuck to the screen filter inside the dust cup. Press the door shut again until it clicks.

4Replace the dust cup on top of the motor base. Hook the two latches onto the tabs on the sides of the dust cup and push down to lock.

14

TOLL FREE: 1-800-798-7398

IMPORTANT:Loss of Suction may occur if foam filters are not cleaned every 3 months. Rinse and allow to air dry completely.

Foam filters may appear dirty after use - this is normal.

Pre-Motor

Foam Filter

Felt Filter

Post Motor

HEPA Filter

Fig. 23

CLEANING THE PRE-MOTOR FILTERS

1Remove the dust cup.

2Pull the 2 filters out from the top of the motor base. (Fig. 23)

3Rinse the filters thoroughly in lukewarm water until the water runs clear.

DO NOT put the filter in the washing machine or dishwasher.

NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter.

4Squeeze out excess water and let air-dry for at least 24 hours before replacing. Do not use a hair dryer or other heating methods to dry.

5Place the felt filter in first, then the foam filter.

6Replace the dust cup.

NV355_NV356E_NV356K_NV357_IB_110714_3.indd 14

11-07-20 9:32 AM

Page 13 Page 15
Image 14
Page 13 Page 15
Contents NV355 Series Owner’s guide Important Safety Instructions Unit again Do not use without dust cup and/or filters in placeVoltage 120V., 60Hz Watts 1200W Amps 10A Technical SpecificationsNV355 NV356E NV356K NV357 Navigator Lift-Away Getting Started Modes Upright VAC Portable LIFT-AWAYPlace the floor nozzle on a level surface Mode 1 Upright VacTo Assemble When you are finished vacuuming, turn the vacuum off To USEMode 2 Portable Lift-Away Above-Floor Cleaning SuctionDust-AwayHard Floor Attachment Use and Care Reassemble all parts securely before operating vacuum Storage and MaintenanceStore Your Vacuum Safely Do not operate the vacuum with WET filtersCleaning the PRE-MOTOR Filters MaintenanceComponent Maintenance Schedule Emptying the Dust CUPCover away from the vacuum. Fig Maintenance cont’dCleaning the POST-MOTOR Hepa Filter Checking for Blockages Cleaning the Motorized Floor BrushEnsure that all the filters are clean Dust cup may be full. Empty dust cupPart Troubleshooting Guide EURO-PRO FIVE-YEAR 5 Limited Warranty Product RegistrationNV355.NV356E.NV356K.NV357.110714.3

NV355, NV356K, NV356E, NV357 specifications

The Shark NV357, NV356E, NV356K, and NV355 are part of Shark's acclaimed line of upright vacuum cleaners, each designed with unique features and innovative technologies to cater to diverse cleaning needs. These models are well-regarded for their powerful suction, versatility, and convenience, making them popular choices among homeowners.

One of the standout characteristics across these models is their impressive suction power. Equipped with Shark's powerful motor technology, they effectively capture dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and upholstery. The advanced suction design works seamlessly to ensure deep cleaning performance, making them ideal for households with pets and allergy sufferers.

All models come with the DuoClean technology, which features two brush rolls working in unison to provide a thorough clean. The soft brush roll gently pulls in larger particles, while the stiff bristle brush deep cleans and removes embedded dirt from carpets. This combination not only enhances cleaning efficiency but also ensures a smooth transition between different floor types.

Another notable feature is the Anti-Allergen Complete Seal technology incorporated in these vacuums. This design prevents allergens and dust particles from escaping back into the air, ensuring that the air remains clean and healthy. Along with a HEPA filter, these models are particularly beneficial for those who suffer from allergies, providing peace of mind during cleaning.

The Shark NV357, NV356E, NV356K, and NV355 also feature a lightweight and ergonomic design, making them easy to maneuver around furniture and various living spaces. The models come with a large-capacity dust cup, which reduces the frequency of emptying, thus enhancing convenience during cleaning sessions. Additionally, each vacuum includes a variety of attachments such as a dusting brush, crevice tool, and upholstery tool, allowing users to clean hard-to-reach areas with ease.

These models also feature a flexible lift-away design, which allows the canister to be detached for portable cleaning. This function makes it easy to clean stairs, vehicles, and above-floor areas without struggling with the entire unit. As such, the Shark NV357, NV356E, NV356K, and NV355 offer ultimate practicality, effectively combining performance and user-friendly features for an exceptional cleaning experience.
Top Page Image Contents