Shark NV357, NV356E, NV355, NV356K manual Maintenance cont’d, Cleaning the POST-MOTOR Hepa Filter

Page 15

Maintenance - cont’d

a

Fig. 24

Fig. 25

Fig. 26

CLEANING THE POST-MOTOR HEPA FILTER

1

Remove the filter cover from the front of the

 

vacuum by pulling up on the tab and pulling the

 

cover away from the vacuum. (Fig. 24)

2

STake out the HEPA filter by pulling it straight out.

3

Turn the filter over so that the dirty side is on

 

the bottom and vigorously tap it clean against a

 

garbage can to remove any dust. (Fig. 25)

4

Wash the filter under the tap using lukewarm

 

water with the dirty side face down until the water

Fig. 27

Fig. 28

CLEANING THE POWER BRUSH (model NV355 only)

1Slide the locking latch (a) forward and tilt the bottom cover upward to remove. (Fig. 27)

2Carefully remove any blockage or debris and cut away any build-up of hair or string wrapped around the rotating bristle brush with scissors.

3To reassemble, insert the tabs on the front edge of the bottom cover into the matching holes in the top half and tilt it back down until it clicks into place. (Fig. 28)

a

runs clear. (Fig. 26)

Fig. 29

Fig. 30

DO NOT put the filter in the washing machine or dishwasher.

NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter.

5Allow the filter to air dry for 24 hours. Do not use a hair dryer or other heating methods to dry.

6Once the HEPA filter is dry, replace it back into the vacuum.

7Replace the cover by inserting the two tabs into the holes at the top and then swinging the cover down until it clicks into place.

CLEANING THE POWER BRUSH (model NV356E, NV356K, NV357 only)

1Slide the locking latch (a) forward and gently tilt brush housing upward to open. (Fig. 29)

IMPORTANT: DO NOT force; it will not open all the way.

2Carefully remove any blockage or debris.

3Turn the power brush over to inspect the rotating brush and cut away any build-up of hair or string wrapped around the rotating bristle brush with scissors. (Fig. 30)

4Push the housing back down and slide the locking latch backward to lock.

www.sharkclean.com

15

NV355_NV356E_NV356K_NV357_IB_110714_3.indd 15

11-07-20 9:32 AM

Image 15
Contents NV355 Series Owner’s guide Important Safety Instructions Do not use without dust cup and/or filters in place Unit againTechnical Specifications NV355 NV356E NV356K NV357Voltage 120V., 60Hz Watts 1200W Amps 10A Navigator Lift-Away Getting Started Portable LIFT-AWAY Modes Upright VACMode 1 Upright Vac To AssemblePlace the floor nozzle on a level surface To USE When you are finished vacuuming, turn the vacuum offMode 2 Portable Lift-Away Suction Above-Floor CleaningDust-AwayHard Floor Attachment Use and Care Do not operate the vacuum with WET filters Storage and MaintenanceStore Your Vacuum Safely Reassemble all parts securely before operating vacuumEmptying the Dust CUP MaintenanceComponent Maintenance Schedule Cleaning the PRE-MOTOR FiltersMaintenance cont’d Cleaning the POST-MOTOR Hepa FilterCover away from the vacuum. Fig Dust cup may be full. Empty dust cup Cleaning the Motorized Floor BrushEnsure that all the filters are clean Checking for BlockagesPart Troubleshooting Guide Product Registration EURO-PRO FIVE-YEAR 5 Limited WarrantyNV355.NV356E.NV356K.NV357.110714.3

NV355, NV356K, NV356E, NV357 specifications

The Shark NV357, NV356E, NV356K, and NV355 are part of Shark's acclaimed line of upright vacuum cleaners, each designed with unique features and innovative technologies to cater to diverse cleaning needs. These models are well-regarded for their powerful suction, versatility, and convenience, making them popular choices among homeowners.

One of the standout characteristics across these models is their impressive suction power. Equipped with Shark's powerful motor technology, they effectively capture dirt, dust, and debris from various surfaces, including carpets, hardwood floors, and upholstery. The advanced suction design works seamlessly to ensure deep cleaning performance, making them ideal for households with pets and allergy sufferers.

All models come with the DuoClean technology, which features two brush rolls working in unison to provide a thorough clean. The soft brush roll gently pulls in larger particles, while the stiff bristle brush deep cleans and removes embedded dirt from carpets. This combination not only enhances cleaning efficiency but also ensures a smooth transition between different floor types.

Another notable feature is the Anti-Allergen Complete Seal technology incorporated in these vacuums. This design prevents allergens and dust particles from escaping back into the air, ensuring that the air remains clean and healthy. Along with a HEPA filter, these models are particularly beneficial for those who suffer from allergies, providing peace of mind during cleaning.

The Shark NV357, NV356E, NV356K, and NV355 also feature a lightweight and ergonomic design, making them easy to maneuver around furniture and various living spaces. The models come with a large-capacity dust cup, which reduces the frequency of emptying, thus enhancing convenience during cleaning sessions. Additionally, each vacuum includes a variety of attachments such as a dusting brush, crevice tool, and upholstery tool, allowing users to clean hard-to-reach areas with ease.

These models also feature a flexible lift-away design, which allows the canister to be detached for portable cleaning. This function makes it easy to clean stairs, vehicles, and above-floor areas without struggling with the entire unit. As such, the Shark NV357, NV356E, NV356K, and NV355 offer ultimate practicality, effectively combining performance and user-friendly features for an exceptional cleaning experience.