Shark SE200 manual Quick Start, Assemble, Fill

Quick Start

a

b

fig. 1

ASSEMBLE

1Fit together the backsaver handle (a) and lower pole (b). Insert the assembled pole into the top of the mop as shown. (fig. 1)

2Place the micro-fiber cleaning pad underneath the mop head, with quick fastener strips facing up. Simply press the mop to the pad to attach it. (fig. 2)

fig. 2

fig. 3

FILL

3Before plugging in the mop, remove the cap to fill the water tank. Use the filling flask and funnel to fill the tank with water to the “MAX” line. Replace the water tank cap. (fig. 3)

TOLL FREE: 1-800-798-7398