Getting Started
When assembling your steam mop there may be a little water in or around the water tank. This is because we test all our steam mops 100% before you buy them, so you get a quality Shark® Steam Mop.
fig. 3
A 
B C 
G
DE 
F 
ABacksaver handle B Lower Pole
C Steam Mop
D 2
F Funnel
G Steam Button
2 | TOLL FREE: |
fig. 1
fig. 2
ASSEMBLY
1Remove all the parts from the package. Verify all the listed parts are included.
2Insert the lower pole into the Backsaver handle as shown. (fig. 1)
3Insert the assembled pole into the base of the steam mop. Gently push down on the pole until you hear it click into place. (fig 2)