Heater Wiring

3.This unit may never be connected to any existing heating system or component(s) previously used with non-potable water heating appliance.

4.When the system requires water for space heating at temperatures higher than required for domestic water purposes, a tempering valve must be installed. Please refer to installation diagrams on pages 23 through 28 in back of manual for suggested piping arrangements.

IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE APPLIANCE MUST BE REPLACED, IT MUST BE REPLACED WITH 105°C OR ITS EQUIVALENT, EXCEPT IN THE BURNER HOUSING. IN THIS CASE USE 200°C WIRE.

THE COMPUTER CONTROL REQUIRES A SOURCE OF STABLE CLEAN ELECTRICITY FOR PROPER OPERATION. INSTALLING THE HEATER ON A BRANCH CIRCUIT THAT HAS ELECTRONIC NOISE, IS SUBJECT TO FLUCTUATIONS IN VOLTAGE LEVEL OR HAS AN APPLIANCE WHICH GENERATES EMF OF RFI INTERFERENCE CAN CAUSE THE CONTROLLER TO MALFUNCTION. A HIGH QUALITY POWER

CONDITIONER MUST BE INSTALLED IF THE ABOVE CONDITIONS EXIST. MALFUNCTIONS CAUSED BY A POOR ELECTRICAL SUPPLY ARE NOT COVERED UNDER YOUR WARRANTY.

The controller is wired to the heater as shown in Figure 15. The model and rating plate provides the electrical information needed to size the complete heater branch supply.

All electrical work must be installed in accordance with the National Electrical Code, NFPA 70 or the Canadian Electrical Code, CSA C22.1 and local requirements.

When installed, the appliance must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22.1.

DO NOT ENERGIZE THE BRANCH CIRCUIT BEFORE THE HEATER TANK IS FILLED WITH WATER.

NOTE: This controller is Polarity Sensitive. If the Hot and Neutral Supply Voltage is reversed, the controller will not sense flame. Verify polarity before connecting the unit.

FIGURE 15.

100, 101 specifications

State Industries 101,100 is an innovative company that specializes in manufacturing high-quality industrial equipment and machinery. Founded with a vision to enhance productivity and efficiency across various sectors, State Industries has established itself as a trusted name in the industry. The company is known for its commitment to quality, sustainability, and cutting-edge technology, making it a preferred choice for businesses looking to elevate their operations.

One of the main features of State Industries 101,100 is its extensive product line, which includes a wide range of industrial machines, tools, and systems. The company’s offerings are designed to cater to various industries, such as manufacturing, construction, energy, and transportation. From heavy-duty machinery to precision tools, State Industries ensures that its products meet the highest standards of performance and reliability.

A key aspect of State Industries’ success is its incorporation of advanced technologies in its manufacturing processes. The company utilizes state-of-the-art machinery and techniques, including computer-aided design (CAD), robotics, and automation. These technologies enable State Industries to produce parts and equipment with exceptional precision, which ultimately leads to improved overall performance. Additionally, the company places a strong emphasis on research and development, constantly seeking new ways to innovate and enhance its product offerings.

Sustainability is another defining characteristic of State Industries 101,100. The company is deeply committed to minimizing its environmental impact by adopting eco-friendly practices throughout its operations. This includes using sustainable materials, reducing waste during production, and implementing energy-efficient technologies. State Industries also actively engages in initiatives aimed at promoting green technology, striving to contribute positively to the environment while delivering high-quality industrial solutions.

Customer satisfaction remains a top priority for State Industries. The company fosters strong relationships with its clients by offering tailored solutions, responsive customer service, and comprehensive support throughout the product lifecycle. With a focus on understanding customer needs and challenges, State Industries is dedicated to delivering exceptional value and reliability with every product.

In summary, State Industries 101,100 stands out as a forward-thinking company that combines advanced technology, a commitment to sustainability, and a customer-centric approach in its operations. As industries evolve and face new challenges, State Industries is well-positioned to continue leading the way in industrial innovation.