DISPLAY BUTTON
WHILE IN THE RADIO OR CD STOP MODE:
Press the DISPLAY button on the remote once to show the clock on the display. Press a second time to show the timer’s On Time. Press again or wait five seconds and the display will show the radio frequency or total tracks/time of the CD.
WHILE PLAYING A CD:
Press the DISPLAY button on the remote once to show the remaining time of the CD on the display. Press a second time to show the clock. Press a third time to show the timer’s On Time. Press again to show the elapsed time of the CD.
NOTE: While the display is showing the clock or timer's on time, after five seconds, it will return to display the elapsed time of the CD.
WHILE IN THE LINE IN MODE:
Press the DISPLAY button on the remote once to show the timer’s On Time. Press again or wait five seconds and the display will show the clock.
EQ (EQUALIZER) | MUTE | HEADPHONE JACK |
With the power on, press the EQ button to cycle through the preset EQ settings or to turn the EQ off. Each press of the EQ button will cycle as follows: CLASSIC, ROCK, POP, JAZZ, Off.
NOTE: If the
To temporarily mute the sound, press the MUTE button on the remote control; “MUTE” will appear in the display and the sound will be muted. Press the MUTE button again to restore the sound and “MUTE” will disappear from the display.
To listen to the unit through headphones, simply insert the headphones (not included) into the Headphones jack. The speakers will be disconnected when the Headphones are plugged in.
9