LISTENING TO THE RADIO
Press the POWER button to turn the unit on.
Press the TUNER Function button to select the radio.
NOTE: You can also repeatedly press the FUNCTION button on the remote to select the tuner.
Press the STOP/BAND (■) button |
to select AM or FM. |
2
1
MANUAL TUNING: Repeatedly press the Tune/Skip/Search o 1
or button to manually advance2 the frequency in the display up or down until the desired frequency appears.
2
1
AUTOMATIC TUNING: Press and hold the Tune/Skip/Search
or button until theo
frequency1 in2the display starts to scan, and then release the button; the tuner will search and then stop on the next strong station it finds. Repeat this step until the desired frequency appears in the display.
Press the ST/MO button on the remote while listening to an FM station to cycle between the FM stereo and mono modes.
NOTE: If FM STEREO is selected and you have tuned to an FM Stereo station, “ST” will light in the display.
1
2
2
Adjust the EQ button and VOLUME buttons (and❶the X- BASS button on the❷ remote) as desired.
Hints for Better Reception
10