MQ-D206H Troubleshooting ENGINE/PUMP | Multiquip MQ- D206H specification

MQ-D206H — TROUBLESHOOTING (ENGINE/PUMP)

TABLE 7. ENGINE TROUBLESHOOTING (Continued)

SYMPTOM	POSSIBLE PROBLEM	SOLUTION

Operation not satisfactory

	Governor adjustment improper?	Adjust governor to correct lever.

	Governor spring defective?	Clean or replace ignition.
Rotational speed fluctuates.
Rotational speed fluctuates.	Fuel flow erratic?	Check fuel line.
	Fuel flow erratic?	Check fuel line.

	Air taken in through suction	Check suction line.
	line?

Recoil starter not working	Dust in rotating part?	Clean recoil starter assembly.
Recoil starter not working
properly.	Spring spring failure?	Replace sprial spring.
	Spring spring failure?	Replace sprial spring.

TABLE 8. PUMP TROUBLESHOOTING

SYMPTOM	POSSIBLE PROBLEM	SOLUTION

	Not enough priming water in the housing?	Add water.

	Engine speed too low?	Increase throttle.

	Strainner plugged?	Clean strainer.

	Suction hose damaged?	Replace or repair hose, and clamps

	Air leak at suction port?	Check that fittings are tight and properly sealed.

Pump does not take on water.	Pump is located too high above water line?	Move pump closer to water.
	Debris collecting in pump housing?	Clean pump housing.

	Water leaking out weep hole between pump and	Check condition of mechanical seal and gaskets,
	engine?	between pump end and engine housing.

	Valves not seated correctly?	Check that valves are seated correctly. Pour water in
	Valves not seated correctly?	in suction chamber to help seal valves.
		in suction chamber to help seal valves.

	Pump does not prime correctly?	Check diaphragm for breaks or leaks.

Pump takes in water, little or no	Engine speed too low?	Increase throttle speed.
discharge.	Suction strainer partially plugged?	Clean strainer.
	Suction strainer partially plugged?	Clean strainer.

	Fittings/clamps are not sealed properly?	Tighten, replace or add clamp. (Keep extra seals on
Suction hose leaks at inlet.	Fittings/clamps are not sealed properly?	pump)
		pump)

	Hose diameter is too large?	Use smaller diameter hose or replace hose.

Discharge hose does not stay	Pressure too high?	Check pressure, add additional clamp.
Discharge hose does not stay
on coupling.	Hose kinked or end blocked?	Check hose.
	Hose kinked or end blocked?	Check hose.

MQ-D206H DIAPHRAGM PUMP — PARTS MANUAL— REV. #0 (12/15/03) — PAGE 27

MQ- D206H specifications

The Multiquip MQ-D206H is a cutting-edge, high-performance diesel engine generator designed to provide reliable power for a variety of applications, including construction sites, outdoor events, and emergency power needs. This generator stands out in the market due to its robust design, advanced features, and high efficiency, making it a preferred choice among professionals in various industries.

One of the key features of the MQ-D206H is its powerful and durable 206cc diesel engine. This engine is engineered to deliver consistent power output while maintaining excellent fuel efficiency, allowing users to operate the generator for extended periods without the need for frequent refueling. The MQ-D206H is capable of producing up to 6,000 watts of continuous power, making it suitable for running multiple tools and equipment simultaneously.

The generator is equipped with a large fuel tank that offers extended runtime, ensuring that users can rely on it during long working hours without interruptions. Its compact and portable design, complemented by durable wheels and a sturdy frame, allows for easy transportation and setup in various locations. This portability makes it an ideal choice for both stationary use and on-the-go power requirements.

In terms of technology, the Multiquip MQ-D206H features advanced noise reduction technologies, making it one of the quieter generators in its class. The built-in sound attenuated enclosure significantly reduces operational noise, helping to maintain a quieter environment in residential areas or during outdoor events.

Moreover, the MQ-D206H includes innovative safety features such as low oil shutoff and over-current protection, which help safeguard the engine and connected equipment from damage. The user-friendly control panel offers easy access to essential functions, including voltage selection and circuit breakers, allowing for a straightforward operation.

Construction professionals and event organizers will appreciate the high-quality electrical components within the MQ-D206H, which are designed to deliver clean and stable power, ensuring that sensitive electronic devices are protected from voltage surges.

In summary, the Multiquip MQ-D206H is a reliable and versatile diesel generator that excels in performance, fuel efficiency, and portability. With its advanced features and rugged design, it caters to a wide range of power needs, making it an indispensable tool for both professional and recreational users.