Healthrider HREL8806.1 manual Television Troubleshooting, Problem, Solution

TELEVISION TROUBLESHOOTING

You can solve most television problems by following the steps below. Find the symptom that applies, and follow the steps listed. If you need further assistance, please see the front cover of this manual.

PROBLEM:

Television reception is poor.

SOLUTION:

a.Check for the problems listed below and follow the applicable instructions.

•Ignition (black spots or horizontal streaks that appear or a picture that flutters or drifts)— Usually this is caused by interference from auto- mobile ignition systems, neon lamps, electric drifts, or other electric appliances. Try changing the position of the elliptical exerciser or other electric appliances to correct the problem. Make sure the elliptical exerciser is plugged into its own electrical circuit.

•Ghosts—Ghosts are caused by the television signal following two paths—one is the direct path and the other is reflected from tall buildings, hills, or other objects.

•Blue Screen—If the elliptical exerciser is located in the fringe area of a television station where the signal is weak, the picture may be of poor quality or a blue screen may appear.

Note: If one of these symptoms appears, the symp- tom may be caused by the local company signal reception. Contact the local cable company.

PROBLEM:

No display appears in the CONSOLE mode and no picture appears in the TV mode.

SOLUTION:

a.Make sure that the power cord is plugged into a properly grounded outlet. Also make sure that the power cord is securely connected to the jack on the front of the elliptical exerciser.

PROBLEM:

The display appears in the CONSOLE mode, but no picture appears in the TV mode.

SOLUTION:

a.Check the following coaxial cable connections:

•make sure that the coaxial cable is properly con- nected to a CATV cable (see page 12).

•make sure that the coaxial cable is connected to the terminal on the front of the elliptical exerciser.

•Make sure that the coaxial cable is connected to the console (see step 14 on page 11).

PROBLEM:

There is no sound or picture when a DVD player or VCR is connected to the personal television.

SOLUTION:

a.If the DVD player or VCR is connected with a CATV cable, make sure that the TUNER mode is selected on the console. If the DVD player or VCR is con- nected with an RCA component video cable, make sure that the AV1 mode is selected on the console.

b.Make sure that the CATV cable or the RCA compo- nent video cable is connected to the correct audio/video output terminal or jacks on the DVD player or VCR. Refer to your DVD player or VCR owner’s manual for detailed connection instructions.

24