HOW TO USE THE INFORMATION MODE
1.Press and hold down the TV button and adjust the television settings if desired.
Press and hold down the TV button for several seconds to access the information mode. The brightness level indicator will appear on the televi- sion screen. Press the Volume buttons to adjust the brightness setting if desired.
Next, press the Channel buttons until the contrast, color, sharpness, or hue level indicator appears. Adjust the settings, if desired, by pressing the Volume buttons.
Note: The elliptical exerciser features a demo mode that is intended to be used only while the elliptical exerciser is displayed in a store. When the demo mode is turned on, the console will not turn off automatically when the elliptical exerciser is not in use. Press the Start button repeatedly to turn off or turn on the demo mode. The words DEMO OFF or DEMO ON will appear at the top of the screen to indicate whether the mode is turned on or off.
2.Press the TV button again and add or delete cable channels.
Note: Complete this step only if you are using ana- log cable.
After all valid cable channels available in your area have been saved into the television’s memory (see step 4 on this page), you can manually add chan- nels or delete unwanted channels.
To add or delete a cable channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume increase button to add the channel, or the Volume decrease button to delete the channel. Continue
this process until you have added all desired chan- nels and deleted all unwanted channels.
3.Press the TV button again and select a cable connection.
After you press the TV button, press the Volume increase button to select the Standard Cable set- ting, the Channel decrease button to select the Cable IRC setting, or the Channel increase button to select the Cable HRC setting. Note: If you have connected a CATV cable, one of the three Cable settings should be selected; try all three Cable set- tings, if necessary, to find the optimal setting.
4.Press the TV button again and save cable channels into the television’s memory.
When you press the TV button, the television will begin scanning all the cable channels available in your area. When no signal is detected on a cable channel, the channel will be skipped. When a cable signal is detected, the channel will be saved into memory and the next channel will be selected. This process will continue until the highest channel number is reached. Do not exit the information mode while the television is scanning for chan- nels. Note: If you are viewing channels through an external source such as a cable box or a VCR, the television will save only the channel used by the external source.
5.When you are finished using the information mode, press the Display button.
To exit the information mode at any time (except while the television is scanning channels), press the Display button.
22
