JVC HR-S9850EU You can set the B.E.S.T. Biconditional Equalised Signal, Playback, Lot of noise

		EN 69
		* The default setting is bold in the table below.
8 DIGITAL TBC/NR		Your recorder is equipped with the Digital TBC (Time Base
ON		Corrector) that removes jitter from fluctuating video signals to
OFF		deliver a stable picture even with old tapes and rental cassettes.
		The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
		and enables clear picture reproduction is also linked to this
		function.
		We recommend that you set “DIGITAL TBC/NR” to “ON” when...
		... playing back a tape recorded on a camcorder.
		... playing back a tape repeatedly used.
		... using this video recorder as the source player for editing.
		NOTES:
		● If you play back a tape recorded under poor TV reception
		condition, the picture may become more stable with Digital
		TBC/NR set to off.
		● When “DIGITAL TBC/NR” is set to “ON”, if you play back a
		tape where certain types of signals are recorded (using a PC or
		some character generators), the playback picture may be
		distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.
		● When playing back a MESECAM tape, Digital TBC/NR does not
		function even though “DIGITAL TBC/NR” is set to “ON”.
8 B.E.S.T.		You can set the B.E.S.T. (Biconditional Equalised Signal
ON		Tracking) system to “ON” or “OFF” ( pg. 29).
OFF
8 PICTURE CONTROL		This feature helps you to adjust the playback picture
AUTO:	Provides the optimised picture	quality according to your preference. Normally select
	benefits of the B.E.S.T. Picture	“AUTO”.
EDIT:	System.	NOTES:
	Minimizes picture degradation
	during editing (recording and	● When you select “EDIT”, “SOFT” or “SHARP”, the selected
	playback).	mode will not change until you select another mode.
SOFT:		● When you select “EDIT” to dub tapes, be sure to select “AUTO”
	Reduces image coarseness when
		after you finish dubbing the tapes.
	viewing overplayed tapes containing
		● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches
	a lot of noise.
SHARP:		automatically from “AUTO” to “NORM”.
	Clearer, sharper-edged picture when
	viewing images with lots of flat,
	same-coloured surfaces such as
	cartoons.
8 AUTO TIMER		When this function is set to “ON”, the timer is
ON		automatically engaged when the recorder power is turned
OFF		off, and automatically disengaged when the recorder is
		powered back on.
		NOTE:
		For safety, when “AUTO TIMER” is set to “OFF”, all other recorder
		functions are disabled while the Timer mode is engaged. To
		disengage the timer, press # (TIMER).
8 O.S.D.		When this function is set to “ON”, various operational
ON		indicators appear on the TV screen. Messages appear in
OFF		the selected language ( pg. 15, 16).
		NOTES:
		● When you use this recorder as the source player for editing, be
		sure to set “O.S.D.” to “OFF” before starting.
		● During playback, the operation mode indicators may be
		disturbed depending on the type of tape being used.