Safety Precautions | JVC HR-S9850EU specification

2 EN	SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on pages 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

JVC HR-S9850EU specifications Safety Precautions

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCD Situate the recorder Check the contents10 EN Connect the recorder to TV Video Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Turn on the recorder Auto Set Up12 EN Select your country Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or e Set the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Language Access the Main Menu screenAccess the Country Set screen 16 EN Attach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connections Setting satellite receivers brand and channel 18 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 EN Pause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playback Skip Search 22 ENVariable Speed Search Index Search Manual Tracking Next Function MemoryRepeat Playback Soundtrack Selection 24 EN Instant Timer Recording ITR Tape Remaining Time Retake Engage the Record-Pause mode26 EN Locate the start point Super VHS ET S-VHS ET Engage the S-VHS ET modeAdjust the audio recording level Audio Recording Level Control Received Receiving Stereo and Bilingual ProgrammesOn-screen Display Playback Recording Access the Showview Program screen Access the Showview displayAccess the Showview screen 30 EN Engage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme title Express Timer Programming 32 EN Enter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+ 34 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channel You can programme this recorder to timer-record as many as Access the Programme screen/display Disengage the timer modeAccess the Programme Check screen/display Press # TIMER, then press Select the programme to modify Enter the programme title Cancel or change a programmeReturn to the timer mode Programme 4 overlap each other Programme Recording Select the L-2 Select modeRecording mode 38 EN Check the remote control code for the recorder Remote A/B Code SwitchingSet the remote control code Change the code for the recorder Set the TV brand code TV Multi-Brand Remote Control40 EN Operate the TV Operate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Navigation Playback Navigation42 EN Check Memory Check the memory Turn Off NavigationVideo Navigation Title Screen Turn off Navigation 44 EN Access the Find Blank Space screenEdit Title Find Blank Space Entering Character Access the Edit Title screenEdit Tape Title Select the tape title Select the programme 46 ENChoice of Category Select the category Delete the tape data Delete Tape DataDelete Programme Data Delete the programme data 48 EN Access the Find Title screenFind Title Sort By Tape Number Sort By Date Access the Tape No. screenAccess the Date screen Select the programme Sort By Category Access the Category screen50 EN Category you want to watch Edit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorder Press OK or e Access the Output/Input Set screenOUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connector Another Video Recorder 54 EN Recorder Player Pre-recorded tape Audio-dubbed tape Audio Dubbing56 EN CD player, etc End Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX number key 0 and/or PR to select F-1 or S-1 Source tape Before Insert Editing Recording tape Insert Editing58 EN After Insert Editing Locate the end point Engage the Insert Editing modeAV Insert Editing Start Editing Load the source cassette Access the R.A.Edit screen60 EN Start playback of the source cassette Start Random Assemble Editing Memory CapacityPrepare the recording deck End Random Assemble Editing Pause Synchro Editing 62 ENStart Synchro Editing Press Synchro 7/79 Jlip ID Number Access the Jlip ID No. Set screenSet the Jlip ID number Examples Connecting To a Satellite Receiver Simple Connections Perfect Connections Satellite receiver Decoder Back of recorder Connect the decoder Select the input mode66 EN Set the tuner Connecting/Using a Stereo System Make connections Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 70 EN For Example About Ntsc Playback 72 EN Access the Auto Channel Set screenTuner Set Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 74 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 76 ENSet Stations a TV Station And ID List Station Name Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 78 EN Guide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number 80 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operation Troubleshooting 82 EN Recording Timer Recording 84 EN Playback 86 EN Audio Dubbing Auto Set UpManual Tracking Mode Set AV Insert Editing S.T. Picture System International telephone Language code Country code