22 EN

PLAYBACK (cont.)

Variable Speed Search

During playback, turn the JOG dial to the right for forward variable-speed search, or to the left for reverse variable-speed search.

OR

During playback, press w or e.

The more times you press, the faster the playback picture moves.

To decrease speed, press the button for the opposite direction.

To resume normal playback, press 4.

Skip Search

During playback, press 30 SEC 1 to 4 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

To resume normal playback during a Skip Search, press 4.

Index Search

Your recorder automatically marks index codes at the beginning of each recording. Additional index codes can be added manually during playback. (See below.) This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

Activate Index Search.

Press w or e (2 or 6). “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.

To access index codes 2 through 9, press w or e repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press w twice.

To locate the beginning of D from the current position, press e once.

Current position

Index number

When the specified index code is located, playback begins automatically.

Manual Index Mark/Erase

To mark an index code ...

... during playback press INDEX MARK on the recorder.

The recorder will mark an index code at that location.

If “O.S.D.” is set to “ON” ( pg. 69), “MARK” blinks on the screen while an index code is being marked.

To erase an index code ...

... during playback or still press INDEX ERASE on the recorder.

The recorder will fast-forward to the nearest index code and erase it. Playback continues after the index code is erased.

If “O.S.D.” is set to “ON” ( pg. 69), “ERASE” blinks on the screen while an index code is being erased.

NOTES:

Video Navigation ( pg. 42) may not work properly when an index code (VISS signal) is marked or erased manually near a start point of recorded programme.

During timer-recording you cannot mark an index code manually.

Page 22
Image 22
JVC HR-S9850EU specifications 22 EN, Variable Speed Search, Skip Search, Index Search, Manual Index Mark/Erase