62 EN, Start Synchro Editing, Press Synchro 7/79 | JVC HR-S9850EU

62 EN

EDITING (cont.)

Synchro Editing

Recorder

SYNCHRO EDIT connector

LANC cable (not provided)

Camcorder

To LANC connector

Player

The Synchro Editing function synchronizes the start of the playback and recording operations when starting an edit operation using a camcorder with LANC connector and your recorder.

A Make connections.

Connect your recorder to camcorder ( pg. 51), and connect your recorder’s SYNCHRO EDIT connector to the camcorder’s LANC connector.

B Set the recorder’s input mode.

Press AUX (number key “0”) and/or PR to select “F-1” for the AUDIO and VIDEO input connectors, or “S-1” for the AUDIO and S-VIDEO input connectors, depending on the connectors being used.

C Set the edit mode.

See “PICTURE CONTROL” on page 69.

D Locate the start point.

Start playback of the tape in the camcorder, and pause playback when you find the point where you want to start editing. Press and hold 9 and press 7 on your recorder so that the recorder enters the Record-Pause mode.

E Start Synchro Editing.

Press SYNCHRO 7/79.

F Pause Synchro Editing.

Press SYNCHRO 7/79 again.

●Repeat steps 4 – 6 as necessary.

NOTES:

●The Synchro Editing function may not work with the initial part of a camcorder tape.

●The Synchro Editing function cannot be used when using the JLIP function. (Pressing SYNCHRO 7/79 cancels the JLIP function.)

●The Synchro Editing function may not work properly with some type of camcorder.

●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.

Image 62

JVC HR-S9850EU specifications 62 EN, Start Synchro Editing, Pause Synchro Editing, Press Synchro 7/79 again

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Front Display Panel ON-SCREEN Display Remote Control How To Use Remote Control LCD Situate the recorder Check the contents10 EN Connect the recorder to TV Video Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Turn on the recorder Auto Set Up12 EN Select your country Press rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or e Set the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or e Language for the on-screen display Just Clock Language Access the Main Menu screenAccess the Country Set screen 16 EN Attach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connections Setting satellite receivers brand and channel 18 EN VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 20 EN Pause during playback Slow MotionHigh-Speed Turbo Search Activate frame-by-frame playback Skip Search 22 ENVariable Speed Search Index Search Manual Tracking Next Function MemoryRepeat Playback Soundtrack Selection 24 EN Instant Timer Recording ITR Tape Remaining Time Retake Engage the Record-Pause mode26 EN Locate the start point Super VHS ET S-VHS ET Engage the S-VHS ET modeAdjust the audio recording level Audio Recording Level Control Received Receiving Stereo and Bilingual ProgrammesOn-screen Display Playback Recording Access the Showview Program screen Access the Showview displayAccess the Showview screen 30 EN Engage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme title Express Timer Programming 32 EN Enter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+ 34 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channel You can programme this recorder to timer-record as many as Access the Programme screen/display Disengage the timer modeAccess the Programme Check screen/display Press # TIMER, then press Select the programme to modify Enter the programme title Cancel or change a programmeReturn to the timer mode Programme 4 overlap each other Programme Recording Select the L-2 Select modeRecording mode 38 EN Check the remote control code for the recorder Remote A/B Code SwitchingSet the remote control code Change the code for the recorder Set the TV brand code TV Multi-Brand Remote Control40 EN Operate the TV Operate the satellite receiver Satellite Receiver Multi-Brand Remote ControlSet the satellite receiver brand code Navigation Playback Navigation42 EN Check Memory Check the memory Turn Off NavigationVideo Navigation Title Screen Turn off Navigation 44 EN Access the Find Blank Space screenEdit Title Find Blank Space Entering Character Access the Edit Title screenEdit Tape Title Select the tape title Select the programme 46 ENChoice of Category Select the category Delete the tape data Delete Tape DataDelete Programme Data Delete the programme data 48 EN Access the Find Title screenFind Title Sort By Tape Number Sort By Date Access the Tape No. screenAccess the Date screen Select the programme Sort By Category Access the Category screen50 EN Category you want to watch Edit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorder Press OK or e Access the Output/Input Set screenOUTPUT/INPUT SET, then Select and L-2 Input Setting Decoder connector Another Video Recorder 54 EN Recorder Player Pre-recorded tape Audio-dubbed tape Audio Dubbing56 EN CD player, etc End Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX number key 0 and/or PR to select F-1 or S-1 Source tape Before Insert Editing Recording tape Insert Editing58 EN After Insert Editing Locate the end point Engage the Insert Editing modeAV Insert Editing Start Editing Load the source cassette Access the R.A.Edit screen60 EN Start playback of the source cassette Start Random Assemble Editing Memory CapacityPrepare the recording deck End Random Assemble Editing Pause Synchro Editing 62 ENStart Synchro Editing Press Synchro 7/79 Jlip ID Number Access the Jlip ID No. Set screenSet the Jlip ID number Examples Connecting To a Satellite Receiver Simple Connections Perfect Connections Satellite receiver Decoder Back of recorder Connect the decoder Select the input mode66 EN Set the tuner Connecting/Using a Stereo System Make connections Select the mode Mode SetAccess the Mode Set screen Select the mode setting When this function is set to ON, the timer is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture Off, and automatically disengaged when the recorder is 70 EN For Example About Ntsc Playback 72 EN Access the Auto Channel Set screenTuner Set Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 74 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 76 ENSet Stations a TV Station And ID List Station Name Video Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 78 EN Guide Program Number Showview System SetupGuide Program Number Set Enter the Guide Program number 80 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operation Troubleshooting 82 EN Recording Timer Recording 84 EN Playback 86 EN Audio Dubbing Auto Set UpManual Tracking Mode Set AV Insert Editing S.T. Picture System International telephone Language code Country code