Masterpage:Right-NoTitle0
EN 37
Filename [HRS9850EU2.fm]
Page 37 June 5, 2001 12:07 pm
To cancel or change a programme...
DCancel or change a programme.
Press & to cancel a programme. To change programme
settings, press the appropriate button: START+/–,
STOP+/–, DATE+/– , PR+/–, VPS/PDC and/or SP/LP/EP
(p).
●You can change “TV PROG” to “SAT” for the channel position
by pressing the number key “0”.
●If you do not want to edit the programme title, skip steps 5 and
6.
EAccess the Title Edit screen.
FEnter the programme title.
GReturn to the normal screen/display.
Press " as many times as necessary. If there are still
some programmes remaining, go on to step 8.
HReturn to the timer mode.
Press # (TIMER).
NOTE:
You can also check the programmes on the front display panel
even if the recorder’s power is off (unless the recorder is in the
Power Save mode 墌pg.70) or the recorder is in the Timer
mode; however, it is not possible to cancel or change the
programmes.
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and
Programme 4 overlap each other.
AConfirm the overlapping programmes.
Overlapping programmes blink on the TV screen.
BSelect the programme to modify.
Press rt, then press OK or e.
●You can only select one of the overlapping programmes.
NOTE:
If you do not mind this overlap, press PROG to finish the timer
programme setting. The programme with the lower programme
number will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute,
the recorder will return to the normal screen.
CCancel or change programme setting.
To cancel a programme, press & when the Programme
screen you do not want is shown. “PROGRAM
COMPLETED” appears on the TV screen for about 5
seconds, then the normal screen appears.
To change a programme, press the appropriate button:
START+/–, STOP+/–, DATE+/–, PR+/–, VPS/PDC and/or
SP/LP/EP (p) when the Programme screen on which
you want to make changes is shown, then press OK.
“PROGRAM COMPLETED” appears on the TV screen for
about 5 seconds, then the normal screen appears.
NOTE:
If the overlap is not yet solved, or another overlap occurs with
the timer programme setting after making the last correction on a
programme, the conflicting programmes will be shown on the
Programme Check screen again. Repeat the above steps again
until the overlap is solved.
Press the number key “1”.
The Title Edit screen appears.
●You can access the title edit
screen only when
“NAVIGATION” is set to
“ON”. (墌pg. 43)
Press the number keys and e
to enter characters, then
press OK. For details, refer to
“Entering Character” on
page 45.
HRS9850EU2.fm Page 37 Tuesday, June 5, 2001 12:07 PM