
EDITING | EN 51 |
Edit From A
Camcorder
AIf the camcorder has no S-VIDEO output connector ...
Recorder
VIDEO | AUDIO | To rear panel |
PAUSE/R.A.EDIT | ||
input | input | connector |
Audio cable
(not provided)
Video cable (not provided) (JVC camcorder only)
You can use a camcorder as the source player and your recorder as the recording deck.
A Make connections.
AIf the camcorder has no
... connect the camcorder’s AUDIO OUT and VIDEO OUT connectors to the recorder’s front panel AUDIO and VIDEO input connectors.
BIf the camcorder has an
... connect the camcorder’s AUDIO OUT and
AUDIO and S-VIDEO input connectors.
●When using a monaural camcorder, connect its AUDIO OUT connector to the AUDIO L input connector on your recorder.
●When a Master Edit
B Set the recorder’s input mode.
Press AUX (number key “0”) and/or PR to select
C
Camcorder
Player
VIDEO OUT
AUDIO OUT
EDIT
Set the edit mode.
See “PICTURE CONTROL” on page 69.
D Start the camcorder.
Engage the Play mode of the camcorder.
E Start the recorder.
BIf the camcorder has an
Recorder
To rear panel
AUDIO PAUSE/R.A.EDIT
inputconnector
Engage the Record mode of the recorder.
NOTES:
●All necessary cables can be obtained from your dealer.
●When you select “EDIT” to dub tapes in step 3, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you finish dubbing the tapes.
| Audio cable (not provided) |
input |
Camcorder
AUDIO OUT
EDIT
Player