2.While holding thread near spool, draw thread down into the tension area and then around the check spring hotder.
The numbered steps above follow the numbers
on the illustrations.
3. Firmly draw thread up and through
4.Draw thread down and slip it through the thread guide.
Dotted Lines show places where the thread
loops and then is pulled tight+ | 5+ Thread | then | is slipped into | needle bar thread guide. | |
|
|
|
|
| |
| 6. | Thread | needle | from front | to back.. |
NOTE: You may want to cut the end of thread with sharp sctssors for easmr needle threading.
17