|
| e gu _deplate |
Gu_d__ |
| Tempfa_e |
__Catch |
| |
"4ii_i_l | Setting | Mark |
Guide block | _!:!fl;:i!_;i_i | Gear |
2_ a_ When you have selected the template with the size and style button- hole you need, slide the template into the guide plate.
b, Pull catch toward you while sliding the template until the button- hole size you have chosen is at the setting mark,
c.insert gear of base plate into slot of template and fit guide block into the center of the guide slot.
nhote toot
Gear,x _t..f Slot
obbin | " | _" "" _ | point |
|
|
| |
thread |
|
|
|
3.a. Attach the buttonhole toot.
b.Adjust position of gear so it is aligned with the starting point of template.
The lever can be used to change gear position.
C_ Pull the bobbin thread up through guide slot by turning the hand wheel toward you while holding top thread.
d.Place the bobbin and top threads to the left side of gu=de plate. Leave 3 to 4 inches of thread.
46