Sears 385.17724 owner manual WLdth, =dth, No preer, Foot, Width as necessary to form each pattern

Page 37

	= Monogramming		Embroidery
	Set the Machino		Set the Machine
			Set the Machine
	Stitch	wLdth	Stitch	w=dth
	control	5	Stitch	w=dth
	control	5	control	1 to 5
	@		control	1 to 5
	@
	i 2	3 4	_ 2	3 4
			_ 2	3 4

Top thread tension

control 2 to G

Stitch length control 0.5 to ]

2

Stretch Stitch

F' Satin stitch foot

Top thread	tension	Stitch length	control
control 2 to	6	Any number	(not

necessary to adiust)

Here's How

1.Set the same as satin stitch.

2.Back the fabric with paper or interfacing.

							No pre_er
3.	Draw	the	letters	on	the	fabric	foot	Stretch Stitch
	with	tailor's	chalk.
4.	Satin	stitch,	adjusting		the	stitch	Darn	m9 plate
							Darn	m9 plate

width as necessary to form each pattern,

5.If using paper, carefully remove it when you have finished sewing.

Here's How

1.Put the darning plate on the needle plate (see page 29),

2,	Remove	foot	holder	(see page		10),
3.	Adiust	the	stitch	width	as	desired
	(see page 21		),

4.Draw the design on to the fabric with tailor's chalk.

5.Stretch the. fabric between embrol-

dery hoops and place under the needle.

6, Lower the presser foot lever to engage the top thread tension.

7, Holding the top thread in your left hand, rotate the hand wheel toward you one complete turn.

Pull the top thread to draw the bobbin thread through to the surface of the fabric.

8.Using a medium speed, stitch along

the marked outline, guiding the fabric carefully by hand.

34

Image 37

Contents Sewing Machine Into Important Safety nNSTRUCTIONSKenmore Sewing Machine Table of Contents Base Ro taroleGasegr,CabmettsAva=lableiJFoot Bobbin Safety Feature Setthe Pressure Dial SettingSpool Pins Free-Arm Sewing the Removable Extension Table To remove AccessoryStorage BoxOranycirculargarmentarea Orareasofwearinchildrensclothes Etc Check Your PresserFoot Zigzag Foot Presser Foot TypesSlidingButtonhole Foot PresserFoot TypesUses Zipper application see Look Buttonhole FootTo Change Your Needle To Remove the Bobbin from the Machine Wind the Bobbin Insert the Bobbin into the Bobbin Holder Threading chart is located behind Face cover plateThread ThroughOn the illustrations Presser Threads underLeaving Adjust the Top Thread Tension Zigzag Too Tight Too LooseRickrack stretch Reverse On p.14 Practical Stitch ChartThread Stitch Tension Length On pOnp.14 Check On p.14On p Buttonhole Stitch length controt orange Use the Seam GuidesSet the Machine HeresHow Lower the presser footChildrens Control Control I to Basic ZigzagControl 2 to = Satin StitchSatin stitch foot Pressuredial t or Bar Tacking =dth WLdthNo preer FootEither PlateControl 3 to = Overcasting StitchTop thread tension Contro! 3 to Hints@i 3 Control 2 to 6Stitch tength controt yellow stretch st=tch Overcast Stretch Stitching Set the MachineZigzag toot Control 9 to 6Stitch length control orange Stitch width control 2 to Iiilii!!iii!iiii= Learning to Sew Buttonhoes Tips on buttonholingPlaced Control 3 to 5 Blue zone Built-in System311 Control Top thread tensionIlii!iii!!ii!i Buttonhole Style and Size Using Buttonhole AttachmentTemplate 213504005 213505006 213506007 318 112 1116 718 11t6 SizesSet the Machine Stitch width Nhote toot Stitch length control Top thread tension control 2 to Open Ztpper Close Zoper Turn Remove Zipper Control Orange zone Stitch width Control 3 toEasier Set the Machine Stitch WdthIiiiiiiiii iiii!iiiiiiiiiliiiiiiiii!!iiii!ii¸iii!!i ii Elastic Stretch Stitch Top thread tension control 3 to Edging stitchStitch length control 9teen Seam IncorrectProblem Probable Cause Iean7,theBo6 bl nHOtde rii IReplaetleigh=,BtiiPage Parts List 647814042 Single 647814031 No Single647814053 No Single 652806014 Straight Toot 685502019Control Straight Stitching 2829 Hand wheel Herring Bone stretch Hook RaceFoot 4849 6061 Application 4849SEARS, Roebuck and CO., D1817 WA, Hoffman Estates, IL Warranty385 Sewing Machine