SECTION 3. LEARN THE STITCHES
=Sew in a Zipper Fabric Preparation:
Put the right s_des of the fabric to- gether and sew to the end of the zip- per opening. Use the reverse to Iock the stitches.
Sew the zipper opening with stitch length at "4" and top thread tension at "3",
Set the | Machine |
|
Stitch | Stitch | selector |
I |
|
|
I |
|
|
I |
|
|
| (Model | 127141 |
Top thread tension |
|
|
control 3 to 6 | (Model | 11607) |
| ||
| Stitch | length |
H!8")
Zipper teeth
Zipper tape
ot open_ng
control 2 |
To Sew:
1.Fold back the left seam allowance as shown,
4, To sew the left side of the zipper,
set the zipper foot on the left side of the needle.
Right side | Zipper foot |
ot fabric |
|
Top | edge ot fabric |
2.Turn under the right seam allow- ance to form a 1/8" fold.
3.Place the z_pper teeth next to the t/8" fold and pin in place.
5.Lower the zipper foot on the right side at the bottom of the zipper so that the needle pierces the fotd and the zipper tape,
6.Sew through the fold and the Zip- per tape to the point where the slider begins.
7.Lower the needle to hold the fab- ric and raise the presser foot,
2O