Euro-Pro 372H instruction manual Buttons, Sewing Embroidery

Page 19

SEWING EMBROIDERY

Presser foot

darning plate

Pattern selector

(

 

) or

 

 

zig zag

Raise and take off the foot.

Place the fabric in embroidery hoop. Place darning plate over needle plate (see below). Lower the presser foot lifter. Hold the embroidery hoop firmly with your hand.

While sewing the desired pattern, move the embroidery hoop slowly and do not allow your fingers to get near the needle. *Set the needle thread tension a little looser so that the bobbin thread is not pulled through to the right side of fabric.

(See page 13).

*It is recommended to mark the required embroidery pattern on the right side of the fabric with a pencil or tailor,s chalk.

DARNING PLATE

There are a few times when you want to control the feeding of the fabric yourself. Raise needle to its highest position and raise presser foot. Place darning plate over needle plate aligning two pins of darning plate with holes of needle plate. You may then determine the movement of the fabric yourself. See above for embroidery.

embroidery hoop

English

BUTTONS

 

Model 377

Model 374

Model 373/372

 

 

 

 

 

 

 

Presser foot

button foot

 

 

 

button foot

 

 

 

 

 

 

 

 

 

 

 

 

Pattern selector

1-5(54321)

 

 

 

4-6(

)

 

 

 

 

 

 

 

 

 

 

1.Align two holes of button with slot of presser foot and lower foot to hold the button securely.

2.Turn hand wheel manually until needle point is just above button.

3.Adjust stitch selector so needle enters right hole of button.

4.Turn hand wheel by hand so needle enters second hole. The stitch selector may need to be adjusted again. Stitch a number of times.

NOTE:

You may find it helpful to use trans- parent tape to position your button and to keep it in place during sewing. Tear away after stitching.

5.Finish sewing with an extra two inches of thread remaining. Draw these threads to reverse side of gar- ment and tie.

Button foot

Holes of button

Thread Shank

Sew-through buttons on coats and jackets should nave a thread shank to make them stand away from the fabric. Place a straight pin or sewing machine needle on top of button between the holes, and sew over the pin or needle. Pull thread to back of button and wind around stitches to form a firm shank. Tie thread ends securely.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EURO-PRO Page English ±¡ Important Safety InstructionsContents Principal Parts Model HOW to USE the Foot Control HOW to Connect the Machine to the Power SupplyHOW to Replace the Sewing Lamp Changing the Needle Thread and Needle ChartTo Select a Suitable Needle Removing and Attaching the Presser Foot How to adjust the bobbin thread tensionModel RE Moving the Bobbin Case and Bobbin Pattern Selector Model 373/372/372HWinding the Bobbin Threading the Bobbin CaseFig a Threading NeedleDrawing UP the Bobbin Thread Or O Or BOte * U s e a S T R E T C H needle Presser foot Zigzag foot Pattern selector Titch length dial IC OT ZIG ZAG S T IT C HOdel 377/374 M odel 373/372/372H To 2¡¡± Nglish± ¡ Sewing Buttonholes Model 373/372/372HHE Mming Model 377 only Wing B L IND HE MS Model 377/374/373/372/372HSewing Embroidery ButtonsCleaning the Shuttle Race Cleaning the Feed DOGFree ARM Sewing Remedy RemedyYear Limited Warranty

372H specifications

The Euro-Pro 372H is an innovative home appliance designed to enhance the cooking experience while delivering top-notch performance and convenience. This versatile device combines the functions of multiple kitchen appliances into one, making it an ideal addition to any modern kitchen.

One of the standout features of the Euro-Pro 372H is its multifunctionality. The appliance serves as a slow cooker, rice cooker, steamer, and even a sauté pan, providing an all-in-one solution for various cooking needs. The ability to prepare multiple dishes with one device reduces the clutter of kitchen gadgets and simplifies meal preparation for busy households.

The Euro-Pro 372H is equipped with advanced technology that ensures precise cooking results. Its intelligent temperature control system allows users to set the cooking temperature and time, ensuring that meals are prepared to perfection every time. The programmable features offer flexibility, enabling users to set delayed cooking times, which is perfect for those who want to come home to a ready meal.

In terms of capacity, the Euro-Pro 372H is designed to cater to families of all sizes. Its large bowl capacity allows for cooking hefty portions, making it suitable for gatherings or meal prepping for the week. The non-stick inner pot ensures that food doesn't stick, making for easy cleaning and reducing the need for excess oil during cooking.

Safety is also a priority with the Euro-Pro 372H. The appliance incorporates several safety features, including an automatic shut-off function that activates once the cooking cycle is complete. This prevents overcooking and ensures that food remains at optimum quality without supervision.

Furthermore, the sleek and modern design of the Euro-Pro 372H fits seamlessly into contemporary kitchens. Its user-friendly interface features easy-to-read buttons and a clear display, allowing even novice cooks to operate it without difficulty. The compact design makes it easy to store when not in use, contributing to a tidy kitchen space.

In summary, the Euro-Pro 372H stands out for its multifunctionality, advanced cooking technologies, and user-friendly features. It simplifies meal preparation while ensuring delicious results, making it a valuable addition to any kitchen. The combination of convenience, safety, and performance makes the Euro-Pro 372H an excellent choice for home cooks looking to enhance their culinary experiences.
Top Page Image Contents