Euro-Pro instruction manual Nglish, ± ¡, Sewing Buttonholes Model 373/372/372H, ¡¡±

SEWING BUTTONHOLES (Model 377 and 374)

1. Set the pattern selector at¡°¡±		. Then pass the needle thread
throughthe opening in the buttonhole foot and draw both needle
and bobbin threads to	the left side. Turn the balance wheel
towards you until the needle comes to the point (1).
2.Lower the foot and sew slowly until the desired length is sewn,
then stop the machine at	(2).	±¡°
			.	Then sew
3. Raise the needle and set the selector at
several stitches of bar tack until the needle is at point (3).
4. Raise the needle and set the selector at				then sewthe
		±¡°
right side of buttonhole the same length as the left side of
buttonhole. Stop the machine at (4).
		¡°±	then sew several
5. Raise needle and set the selector at
stitches of final bar tack. Stop the machine with the needle at
				°¡	§
point (5). . To lock threads, set the pattern selector at					B	(zero
point of zigzag width).	And sew a few stitches.

6.Cut thebuttonhole open carefully using a seam ripper, taking care not to damage the bar tacks.

(Model EP 377 and 374 only)

E nglish

SEWING BUTTONHOLES (Model 373/372/372H)

1.	¡°¡±	Then pass the needle thread
	Set the pattern selector at
	through the opening in the buttonhole foot and draw both of
	needle and bobbin threads to the right side. Turn the balance
2.	wheel towards you until the needle comes to the point (1).
	Lower the foot and sew slowly until a desired length is sewn,
3.	then stop the machine at (2).	¡°¡±
			then sew
	Raise the needle and set the selector at
4.	several stitches of bar tack until the needle is at point (3).
		¡°¡±	then sew the
	Raise the needle and set the selector at
	left side of buttonhole just as the same length as the right side of
5.	buttonhole. Stop the machine at	(4).
		¡°¡±	then sew several
	Raise the needle and set the selector at
	stitches of final bar tack. Stop the machine with the needle at
	point (5).

6.Cut the buttonhole open carefully using a seam ripper, taking care not to damage the bar tacks.

Note: To make a heavier buttonhole, sew twice by repeating the same procedure.

(Model 373/372/372H)

S E WING ZIP P E R S

			M odel 377		M odel 374					Model 373/372/372H
Presser foot			zipper foot			zipper foot				zipper foot
						A (		)
Pattern selector			M (	)						1-3(	)
S titch length dial			1 to 4			1 to 4
R a is e the	foot		a nd the ne e dle			to its highe s t pos ition					by turning
the ba la nc e whe e l towa rds you.						R e pla c e the foot with					the z ippe r
foot.
1 . P in or	ba s te		the z ippe r ta pe to				the fa bric a nd pla c e the work -
pie c e in pos ition unde r				the foot.
A tta c h s na p		on z ippe r		foot s o			tha t the ne e dle pa s s e s on its
le ft ha nd s ide .
* W he n	s ta rting s e wing,			both ne e dle a nd bobbin thre a ds e nds
s hould be put a wa y unde r						the foot.
2 . S e w	on the		right s ide	of	the		z ippe r		by guiding Z ippe r te e th

a s c los e a s pos s ible to the ne e dle drop. B e fore the foot re a c he s

the s lide r	on	the z ippe r ta pe , ra is e the foot a nd ope n the
z ippe r by	ke e ping the ne e dle in the fa bric .
L owe r the foot a nd s e w on the re ma ining of the s e a m,
3 . To s e w the		le ft s ide z ippe r c ha nge pos ition of foot to bring

the foot to the le ft s ide of the ne e dle . S e w on in the s a me wa y a s you did on the right s ide of z ippe r.

Z ippe r foot

	ta pe
	E le me nts
	F a bric	S lide r
E le me nts			F ia . 1
	S lide r

	E le me nt
Z ippe r foot	N e e dle
	F a bric
Ta pe	E le me nt

15