Euro-Pro 372H Removing and Attaching the Presser Foot, How to adjust the bobbin thread tension

Page 8

REMOVING AND ATTACHING THE PRESSER FOOT

To Remove:

1. Turn the balance wheel towards you until the needle is at its highest position.

presser foot lifter

2. By lifting the lever on the back of the foot holder, the presser foot will drop off.

1

Note: *Do not force the presser foot to remove it.

To Attach:

1.Place the presser foot so that the pin on the foot lies just under the groove of the foot holder. Lower the foot holder.

,

2. When the presser foot lifter is raised youll fin d the presser foot is locked in place.

2

lever

groove

1

2

pin

REGULATING THE THREAD TENSION

Generally, should any tension adjustment be necessary, the adjustment can normally be made by regulating the upper thread tension dial only. Bobbin thread tension has been adjusted at the factory and readjustment is seldom required except for special instances, thread and fabric.

Bobbin thread tension is just right when you can pull the thread from bobbin case easily with a little resistance. Thread tension may be adjusted by tightening or loosening the thread tension dial.

 

The needle thread and the bobbin thread

Properly adjusted thread

should interiock in the center of two layers of fabric

tension for straight sewing

 

*How to adjust the bobbin thread tension

The needle thread is too tight

The needle thread is too loose

The bobbin thread ap- pears on the upper surface of the fabrics

The needle thread ap- pears on the underside of the fabrics

Loosen the needle thread tension by moving the dial to the lower number

Tighten the needle thread tension by moving the dial to the higher number

To increase tension, turn screw clock wise.

To decrease tension. turn screw counter- clock wise.

Remember the higher the number, the tighter the tension. Correctly balanced tensions for one fabric may not be suitable for another. The required tension depends upon the stiffness of fabric, thickness of the fabric, numbers of layers of fabric being sewn, as well as the type of stitch you are making. It is better to test the stitch- ing on a scrap of the fabric you are using before starting to make a garment. The general range for many fabrics is 3-5.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents EURO-PRO Page ±¡ Important Safety Instructions EnglishContents Principal Parts Model HOW to Replace the Sewing Lamp HOW to Connect the Machine to the Power SupplyHOW to USE the Foot Control To Select a Suitable Needle Thread and Needle ChartChanging the Needle How to adjust the bobbin thread tension Removing and Attaching the Presser FootModel Pattern Selector Model 373/372/372H RE Moving the Bobbin Case and BobbinThreading the Bobbin Case Winding the BobbinThreading Needle Fig aOr O Or B Drawing UP the Bobbin ThreadOte * U s e a S T R E T C H needle IC OT ZIG ZAG S T IT C H Presser foot Zigzag foot Pattern selector Titch length dialTo 2 Odel 377/374 M odel 373/372/372HNglish ± ¡Sewing Buttonholes Model 373/372/372H ¡¡±Wing B L IND HE MS Model 377/374/373/372/372H HE Mming Model 377 onlyButtons Sewing EmbroideryCleaning the Feed DOG Cleaning the Shuttle RaceFree ARM Sewing Remedy RemedyYear Limited Warranty

372H specifications

The Euro-Pro 372H is an innovative home appliance designed to enhance the cooking experience while delivering top-notch performance and convenience. This versatile device combines the functions of multiple kitchen appliances into one, making it an ideal addition to any modern kitchen.

One of the standout features of the Euro-Pro 372H is its multifunctionality. The appliance serves as a slow cooker, rice cooker, steamer, and even a sauté pan, providing an all-in-one solution for various cooking needs. The ability to prepare multiple dishes with one device reduces the clutter of kitchen gadgets and simplifies meal preparation for busy households.

The Euro-Pro 372H is equipped with advanced technology that ensures precise cooking results. Its intelligent temperature control system allows users to set the cooking temperature and time, ensuring that meals are prepared to perfection every time. The programmable features offer flexibility, enabling users to set delayed cooking times, which is perfect for those who want to come home to a ready meal.

In terms of capacity, the Euro-Pro 372H is designed to cater to families of all sizes. Its large bowl capacity allows for cooking hefty portions, making it suitable for gatherings or meal prepping for the week. The non-stick inner pot ensures that food doesn't stick, making for easy cleaning and reducing the need for excess oil during cooking.

Safety is also a priority with the Euro-Pro 372H. The appliance incorporates several safety features, including an automatic shut-off function that activates once the cooking cycle is complete. This prevents overcooking and ensures that food remains at optimum quality without supervision.

Furthermore, the sleek and modern design of the Euro-Pro 372H fits seamlessly into contemporary kitchens. Its user-friendly interface features easy-to-read buttons and a clear display, allowing even novice cooks to operate it without difficulty. The compact design makes it easy to store when not in use, contributing to a tidy kitchen space.

In summary, the Euro-Pro 372H stands out for its multifunctionality, advanced cooking technologies, and user-friendly features. It simplifies meal preparation while ensuring delicious results, making it a valuable addition to any kitchen. The combination of convenience, safety, and performance makes the Euro-Pro 372H an excellent choice for home cooks looking to enhance their culinary experiences.
Top Page Image Contents