3. Using TV Features 35
Closethecurtains.c.
Setlevelsbyperformingtheprocedureind.
“AdjustingLevels.”
Fromthe
1.
Initial > SoundPromenugotothe
Custommenu.
Positionyourselfinyourusualviewinglocation.
2.
Remaininthisposition,lookingattheTV,while
makingthefollowingadjustments.
Adju
3.
sting Beam Angles
a. AdjustCenter Beam Angleuntilsoundis
aboutequalinbothears.
b. AdjustLeft Beam Angletomaximizesound
heardfromthefrontleftside.
c. AdjustRight Beam Angletomaximizesound
heardfromthefrontrightside.
d. AdjustLeft Surround Beam Angl etowhere
thesoundseemstocomefromtheleftrear
side.Ifthiscannotbeachieved,makethe
settingthesameasthatforLeftBeamAngle.
e. AdjustRight Surround Beam An gletowhere
thesoundseemstocomefromtherightrear
side.Ifthiscannotbeachieved,makethe
settingthesameasthatforRightBeamAngle.
Adjus
4.
ting Levels
a. AdjustCenter Leveltothemidlevel.
b. Adjustthefollowinglevelsoneatatimesothat
eachonesoundsaboutthesameasthecenter
level:
Left Level
Right Level
Left Surround Level
Right Surround Level
c. Checkallsoundlevelsbyquicklyswitching
betweenthemusing  .
d. Readjustindividuallevelsinsmallincrements
andrecheckasaboveuntilallsoundlevels
seemaboutthesame.
Adjusting an External Subwoofer
5.
a. Playsamplevideoormusiccontaininglow-
frequencybasssound.
b. Press
MORE
andthen
9
(AUDIO).Use  to
displaytheSubwooferoption.
c. WithSubwoofersettoOn,press
ENTER
to
displayasliderforthevolume.
d. Press  toadjustthesubwoofervolume.
How to Make Adjustments in the Cu stom Menu
Press•  toselectanaudiobeam;colorsofthe
adjusterscorrespondtoaudiobeamsintheon-
screendiagram.
Press•  toredirecttheaudiobeamorchange
thesoundlevel.
Controls in the SoundPro
> Custom menu adjust the
direction and focus of the TV’s sound output.
At extreme beam angles, adjustment may b e
limited and the image on screen may not accur ately
represent the sound beams.
Adjust the volume level of individual audio beams
using sliders in the SoundPro > Custom menu.
Resetting Angle and Level Valu es in the Custom
Menu
Press
1.
BACK
toclearallmenus.
Press
2.
MENU.
GototheInitial > SoundPromenu
andpress
ENTER
.
Changeanysetting(e.g.,
3.
TV Location).
Press
4.
BACK
toclearallmenus.
Press
5.
MENU.
GototheInitial > SoundPromenu
andpress
ENTER
.
Enterthecorrectvaluesfortheroomlayout.
6.
Returntothe
7.
Custommenutoadjustanglesand
levels.
Sound Projector, continued
Downloaded From TV-Manual.com Manuals