Appendices 75
Ifpromptedforaname,

4.

highlightthenameyouwant
toassignthedevice.
Highlight

5.

On.
Highlight

7.

EXITandpress
ENTER
toclosetheNew
Device Foundscreen.
Note: AtanytimeaftercompletingAutoInputSens-
ing,youcansettheTV’sHDMIcontrolonoroff
intheInputs > HDMI Controlmenu.
153 or 249 Series.

8.

TosupplementHDMIcontrol
withNetCommandIRcontrol,seepage55.
ManynewHDMIdeviceshaveafeaturecalledCon-
sumerElectronicsControl(CEC)orHDMIControl.
HDMIControlallowsonedevice,suchastheTV,to
controlotherdevices,suchasanA/Vreceiverordi sc
player.UseofCECisoptional.
EachmanufacturerchooseswhichCECfunctionsto
supportsoitisdifficulttopredictwhichdevicesand
featuresarecompatiblewithMitsubishi’sHDMIControl.
YoumayfindthatCECfunctionsforaspecificdeviceare
limited.
To use HDMI Control, you must enable it in b oth
the TV and the device.
In the TV.• EnableHDMIcontrolfromtheNew
Device FoundscreenorfromtheInputs > HDMI
Controlmenu.
I•
n the Device.MostdeviceswithHDMICECcom-
patibilityletyouturnitonoroffinthedevicemenus,
whereitistypicallylistedas“HDMIControl.”

Enabling HDMI Control of CEC Devices

Toensureproperdetection
PoweronHDMIdevicesbeforeconnectingthemto•
theTV.
ConnectandsetupHDMIdevicesoneatatime.•
Poweronthedeviceandallowittocompletethe

1.

power-onsequence(bootup).Stopanyplayback.
ConnectthedevicetooneoftheTV’sHDMIinputs.

2.

WhentheTVdetectstheconnection,the

3.

New
Device Found screenwillappear.
Note: See“IftheNewDeviceFoundScreenDisplays
NoHDMIControlOption”onthispageifthereis
noHDMIControloption.
New Device Found screen with HDMI Control option.
This screen displays only if the device’s HDMI Control is
enabled
.
Appendix B: HDMI Control of CEC Devices

If the New Device Found Screen

Displays No HDMI Control Option

IftheNew Device Foundscreenshowsnooptionfor
HDMIControl,oneoftheseconditionsapplies:
HDMI Control is turned of f in the menus of the •
new device
Action:
Highlighta . EXITandpress
ENTER
toclosethe
New Device Foundscreen.
Displaythedevice’ssetupmenusandenableb.
thedevice’sCECcapabilities.
WaitfortheTV’sc. New Device Foundscreen
toappearagain.
Ifthed. New Device Foundscreendoesnot
appear,poweroffthedevice.Poweronthe
deviceandwaitfortheNew Device Found
screentodisplaywiththeHDMIControl
option.
The device does not have CEC compat ibility•
Action:
Controlthedevicewithitsownremote-
controlorprogramtheTV’sremotecontrolto
operatethedevice.
153 and 249 Series.- UsetheTV’s
NetCommandIRcontrol(page55).
Downloaded From TV-Manual.com Manuals