Mitsubishi Electronics LT-46153, LT-40153 ChannelView Channel Listings, Redirecting Audio Output

263. Using TV Features

ChannelView Channel Listings

ChannelView. Programs for the tuned channel are listed on right side of screen.

ChannelView™ shows memorized channels on the ANT input. It displays channel names and program informa- tion for digital channels as sent by broadcasters or your local cable service provider (information may be incom- plete). No program information is displayed for analog channels.

Note: You must set the TV Clock (page 47) to receive ChannelView listings for the current channel.

Using ChannelView

Feature	Instructions
Receive updates for a	1.	Press	to
digital channel.		highlight a channel
		number.
	2.	Press the INFO key
		(the screen may
		briefly go blank).
Display/hide ChannelView	GUIDE
listings from the ANT
input.
Scan channels one by one.	Hold or .
Scan channels quickly.	Hold PAGE UP/PAGE DN
Jump to listings for a spe-	1.	Enter the channel
cific channel.		number.
	2.	Press ENTER.
See more of the program	INFO
description for the current
channel (if available).
Tune to the highlighted	ENTER
channel.

Redirecting Audio Output

Selecting an Audio Output Device

1.Press MORE and then 9 (AUDIO).

2.	Press	to show the Speakers option. The Speak-
	ers option will display only if there is a recognized
	audio device on an audio or HDMI output.
3.	Press	to select either AV Receiver, Head-

phones, or TV.

Adjusting an External Subwoofer

1.Play sample video or music containing low-fre- quency bass sound.

2. Press MORE and then 9 (AUDIO). Use	to
display the Subwoofer option.

3.With Subwoofer set to On, press ENTER to display a slider for volume.

4. Press to adjust the subwoofer volume level.

Disconnecting an Analog A/V Receiver

When you disconnect an analog A/V receiver, change the Speakers setting to TV to hear sound from the TV speakers. Change the setting using the remote con- trol’s MORE > 9 (AUDIO )key or the Adjust > Audio > Speakers menu.

Controlling A/V Receiver Volume

With a Standard TV Setup

•Recommended Method: Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See page 69.

•Program the TV’s remote control for your A/V receiver and set the TV remote control’s mode to AUDIO. Return the control mode to TV to control the TV.

•Use the remote control that came with the A/V receiver.

With HDMI Control (CEC-Enabled HDMI A/V Receiver)

The TV’s remote control may control some functions of the A/V receiver. See Appendix B, “HDMI Control of CEC Devices,” page 75.

With NetCommand IR Control

153 and 249 Series. Set up NetCommand control of the A/V receiver’s volume functions in the Inputs > AVR menu. The TV’s remote will then control A/V receiver volume. See page 62.

Downloaded From TV-Manual.com Manuals