Janome 4800 manual Needle threader

[1]

[1] Raise the needle to its highest position. Pull down the

needle threader knob as far as it will go.

[2]

[2] Push the knob in the direction of the arrow in the

illustration, inserting hook q into the needle eye.

Lead the thread around guide w and under the hook.

1

Hook

2

Guide

2

1

[3]

[3] Holding on to the thread firmly with your right hand,

pull the needle threader knob in the direction of the

arrow in the illustration, and then upwards to pull the

thread through the eye of the needle.

[4]

[4] Pull the thread through the needle eye.

The needle threader can be used with a #11 to #16

needle or #11 Blue tip needle.

Thread size 50 to 100 should work well.