![](/images/new-backgrounds/1041937/4193737x1.webp)
[1]
1
[2]
•Inserting the bobbin
[1]Place the bobbin in the bobbin holder with the thread running off counterclockwise.
1 End of thread
[2] Guide the thread into the notchA on the front side of the bobbin holder.
2Notch A
A
2
[3]
[3]Continue to draw the thread lightly. The thread slips
into notch .
Pull out about 15 cm (6”) of thread.
3Notch
3
B
4
[4]
[4]Attach the hook cover plate.
Check the threading by referring to the chart shown on the hook cover plate.
4 Threading chart
18