![](/images/new-backgrounds/1041937/4193753x1.webp)
1 3
4
2
[1]
Various Utility Stitches
•Basting
1 | Stitch pattern : | 24 |
2 | Presser foot: | Basting foot P |
3Thread tension dial : 1 to 4
4 Feed dogs : | Down |
* Set the manual thread tension at “1 to 4”.
Attaching the basting foot:
[1] Raise the needle. |
1
[2]
2
3 [3]
2
4
[1] [2] [3] [4]
[2] Remove the foot holder by loosening the thumb | |
screw. | |
[3] Attach the basting foot on the presser bar putting the | |
pin on the needle clamp. | |
Tighten the thumb screw firmly with a large | |
screwdriver. | |
1 | Foot holder |
2 | Thumb screw |
3 | Pin |
4 | Needle clamp |
How to sew
[1]Put some fabric under the foot and press the Up/ down needle button twice to bring the needle thread down through the hole in the foot. Pull the fabric and thread to the rear. Lower the presser foot.
[2]While pressing down the foot control, hold the fabric taut.
[3]When the machine is stopped after one stitch sewing, pull the fabric with the thread to the back.
[4]Repeat steps 2 and 3 to sew. After finishing sewing, pull the threads and fabric to the back and cut the threads.
*After sewing, reset the thread tension dial at “AUTO “ and raise the feed dogs, slide the drop feed lever to theleft.
26