![](/images/new-backgrounds/1041937/4193743x1.webp)
[1]
• Drawing up the bobbin thread
[1] Raise the presser bar lifter, hold the end of the thread as shown.
[2] | [2] Press the Up/down needle position button twice to |
| pick up the bobbin thread. |
Draw up the needle thread together with a loop of bobbin thread.
1 Up / down needle position button
[3]
2
3
1
[3]Pull both threads under the presser foot and to the back of the presser foot leaving clear 10 to 15 cm (4” to 6”) of the threads.
2 Needle thread
3 Bobbin thread
21