Janome JP760 manual Threading the Machine

Page 16

q

Threading the Machine

Raise the presser foot. Press the Up/Down needle button to raise the thread take-up lever to its highest position.

WARNING:

Turn OFF the power switch before threading the machine.

z Draw the thread from the spool and pass it under the thread guide.

q Thread guide

xDraw the thread down along the right

		channel and pull it up around the bottom of the
		thread guide plate.
		Pull the thread up along the left channel
r		w Right channel
		e Thread guide plate
	w	r Left channel
	w

e

c Firmly draw the thread from right to left over the

		thread take-up lever and down into the take-up
	t	lever eye.
	t	t Thread take-up lever
		t Thread take-up lever

vDraw the thread down along the left channel and

slip the thread behind the needle bar thread guide from the left.

y Needle bar thread guide

	y	b Pass the thread through the needle eye from the
	y	front.
		front.

u Needle eye

u

14

Image 16

Contents Instruction Book Important Safety Instructions Know Your Machine Utility Stitches Know Your Machine Setting the Spool PinName of Parts Standard Accessories Extention TableDetaching the table Attaching the tableConnecting the Power Supply Using the start/stop buttonUsing the foot control Turn off the power switch Getting Ready to SEWSpeed control slider Controlling Sewing SpeedFoot control Auto-lock button When stitch pattern #01, #05 or #10 Has Function ButtonsStart/stop button Up/down needle buttonStitch length adjusting button Stitch width adjusting buttonDirect pattern selection buttons Changing the Presser Foot Dropping the Feed DogDetaching and Attaching the Foot Holder Needle thread tension is too tight Balanced tensionNeedle thread tension is too loose Needle and Thread Chart Changing Needles Winding the Bobbin Setting the spool Removing the bobbin Threading for bobbin winding Additional spool pinInserting the bobbin Threading the Machine Needle Threader Drawing Up the Bobbin Thread Basic Stitches Straight StitchAltering the stitch length Altering the needle drop positionTurning square corners Using the seam guide linesSewing from the edge of thick fabric Variety of Straight Stitches and Recommended Feet Zigzag Stitch Altering the stitch widthOvercasting with Zigzag Stitch Utility StitchesMultiple Zigzag Stitch Tricot Stitch Buttonholes To sew Step Step Altering the buttonhole stitch density Altering the buttonhole widthDouble layer buttonhole Altering the buttonhole width Round-end buttonhole Round end and keyhole buttonholes Machine SettingsKeyhole buttonhole Step Knit buttonhole Corded buttonhole Machine Settings Auto buttonhole Machine Settings Button Sewing Attaching the zipper foot optional item Zipper SewingFabric preparation Page Adjusting the needle drop position Machine settingBlind Hemming Eyelet Correcting the shape of an eyeletApplique Decorative SewingPatchwork Smocking Scallop Stitch Decorative Satin StitchesFagoting Cross StitchCorrecting Distorted Stretch Patterns Pattern CombinationCleaning the Hook Race and Feed Dogs Care and MaintenanceReplacing the Bobbin Holder Problems and Warning Signals Condition Cause Reference Needle thread BreaksBobbin thread Needle breaks