Janome JP760 manual Auto buttonhole Machine Settings

Page 32

q

z x

q

c

v

b

w	e	Auto buttonhole
w	e	Machine Settings
		Machine Settings
		q Pattern:	#17
		w Presser foot:	Automatic buttonhole foot R
		e Thread tension:	1 – 5

zPull the Button Holder all the way out.

Insert the fabric under the foot. Press the up/ down needle button twice. Remove the fabric to the left to draw the needle thread through the

hole of the foot.

x Insert the garment under the foot, and lower the needle at the starting point. Then lower the Automatic buttonhole foot R.

q Button Holder

NOTE:

You do not need to pull down the buttonhole lever.

c Sew the left row up to the required length. Then stop the machine and press the reverse button.

w Reverse button

w

vStart the machine again to sew the back bartack and the right row of the buttonhole.

Stop the machine when you are directly opposite the starting point.

Press the reverse button.

bStart the machine again. The machine will sew the front bartack, lock the stitches and automatically stop when the buttonhole is completed.

NOTE:

You can sew another buttonhole identical to the first one by simply restart the machine.

To cut the buttonhole opening, refer to page 25. Refer to page 26 for altering the buttonhole width and stitch density.

30

Image 32

Contents Instruction Book Important Safety Instructions Know Your Machine Utility Stitches Name of Parts Setting the Spool PinKnow Your Machine Standard Accessories Extention TableDetaching the table Attaching the tableConnecting the Power Supply Using the start/stop buttonUsing the foot control Turn off the power switch Getting Ready to SEWFoot control Controlling Sewing SpeedSpeed control slider Auto-lock button When stitch pattern #01, #05 or #10 Has Function ButtonsStart/stop button Up/down needle buttonDirect pattern selection buttons Stitch width adjusting buttonStitch length adjusting button Detaching and Attaching the Foot Holder Dropping the Feed DogChanging the Presser Foot Needle thread tension is too loose Balanced tensionNeedle thread tension is too tight Needle and Thread Chart Changing NeedlesRemoving the bobbin Setting the spoolWinding the Bobbin Threading for bobbin winding Additional spool pinInserting the bobbin Threading the Machine Needle Threader Drawing Up the Bobbin Thread Basic Stitches Straight StitchAltering the stitch length Altering the needle drop positionSewing from the edge of thick fabric Using the seam guide linesTurning square corners Variety of Straight Stitches and Recommended Feet Zigzag Stitch Altering the stitch widthMultiple Zigzag Stitch Tricot Stitch Utility StitchesOvercasting with Zigzag Stitch Buttonholes To sew Step Double layer buttonhole Altering the buttonhole widthStep Altering the buttonhole stitch density Keyhole buttonhole Round end and keyhole buttonholes Machine Settings Altering the buttonhole width Round-end buttonhole Step Knit buttonhole Corded buttonhole Machine Settings Auto buttonhole Machine Settings Button Sewing Fabric preparation Zipper SewingAttaching the zipper foot optional item Page Blind Hemming Machine settingAdjusting the needle drop position Eyelet Correcting the shape of an eyeletPatchwork Decorative SewingApplique Smocking Scallop Stitch Decorative Satin StitchesFagoting Cross StitchCorrecting Distorted Stretch Patterns Pattern CombinationReplacing the Bobbin Holder Care and MaintenanceCleaning the Hook Race and Feed Dogs Problems and Warning Signals Condition Cause Reference Needle thread BreaksBobbin thread Needle breaks