Janome JP760 manual Altering the buttonhole width, Step Altering the buttonhole stitch density

Altering the buttonhole width

Press the stitch width adjusting button to change the buttonhole width.

Press the on the "+" sign to increase the buttonhole width.

Press the on the "–" sign to decrease the buttonhole width.

qNarrower buttonhole

w Wider buttonhole

q w * The width can be altered between 2.5 and 7.0.

Step 1

Step 2

Step 3

Step 4

Altering the buttonhole stitch density

Press the stitch length adjusting button to change the buttonhole stitch density.

Press on the "+" sign to make the stitch sparser. Press on the "–" sign to make the stitch denser.

*The stitch density can be altered between 0.2 and 0.8.

NOTE:

The indicator shows the stitch width or density while

sewing. When the buttonhole is completed, the

indicator will show the pattern number.

Double layer buttonhole

To make a solid and sturdy buttonhole, sew another layer of buttonhole over the previous stitches.

After the buttonhole is finished, simply start the machine again.

Do not raise the foot or buttonhole lever.

The machine will sew another buttonhole in the following order and stop automatically when it is completed:

Step 1: Straight stitching in reverse to go back to the starting point

Step 2: Front bartack and left row, then straight stitching in reverse to go back to the starting point

Step 3: Right row

Step 4: Back bartack and locking stitches at the end

The machine will stop automatically.

NOTE:

A double layer buttonhole can be sewn when the dot is blinking.

26