Bernina Sewing Machine Sewing a manual standard buttonhole

Page 35

Selected practical stitches: Buttonholes

35

Stitch: Buttonhole No. 10

Needle: size and type suitable for the fabric selected (see p. 42)

Thread: cotton or polyester

Feed-dog:up (sewing position)

Presser foot: Buttonhole foot No. 3

Preparation

•select the buttonhole (stitch No. 10)

•screen shows the buttonhole number (10), the presser foot No. 3 and the buttonhole symbol (the first step blinks)

•insert the lower thread in the finger of the bobbin case (see p. 34)

12

34

Sewing a manual standard buttonhole

Both beads are sewn in the same direction.

The individual steps blink on the screen.

1sew the first bead forward, stop the sewing computer

•press the reverse button

2sew reverse straight stitch, stop the sewing computer at the first stitch (buttonhole begin)

•press the reverse button

3sew the bartack and the second bead, stop the sewing computer

•press the reverse button

4sew the bartack and the securing stitches

030595.50.04_0201_a125_EN

Image 35

Contents

Welcome to To reduce the risk of electric shock Important Safety InstructionsThis sewing computer is intended for household use only Front view Details of the sewing computerThread path Adjustment2330 Bobbin cover FHS connection Stitch plate Thread take up coverBack view Thread cutter Carrying handlePresser foot lifter ManualFabric cover AccessoriesStandard accessories Start-stop-unitAttaching the accessory box to the sewing computer Accessory boxFree standing accessory box Storing accessoriesPower cable Free-Hand-System FHS presser foot lifter* knee-operated Sewing tableWinding the bobbin Thread cutter Winding the bobbinBobbin case Removing the needle Inserting the bobbinChanging the needle Insert the bobbinAttaching the presser foot sole Changing the presser footSupplementary spool pin Changing the presser foot soleThreading the upper thread Thread cutter Bringing up the lower threadButton below the handwheel Stitch plateFeed-dog Stitch plate markingsThread tension Screen shows Main switch toGeneral instructions Stitch length Stitch* selectionStitch width Needle positionClr/del clear/delete FunctionsNeedle stop Shorter stitch length Longer stitch length BalanceReverse pattern sole Overlock sole Presser foot selection snap-on systemPresser foot shaft Buttonhole soleActiva StitchesPractical and decorative Quilting- and Decorative stitchesStitches Gathering stitch Standard buttonholeDarning program Straight stitch Seam end Securing programSeam begin Oversewing edges C Zig-zag stitchSatin stitch Sewing Fine stitch width adjustment Blind hem PreparationDarning program Densely woven ZippersTIP To sew around zipper pull Seam begin Zipper or fabric is thick orManual buttonhole Sewing a manual standard buttonhole Ideal cords Buttonhole with gimpGimp Foot NoWith the seam ripper Special accessory Handlook quilt stitch Sewing stretch fabrics Vari-overlock seamClosed seam Knits and jerseyOverlock foot No or Reverse pattern foot No Double overlock seamDouble overlock No Cotton or polyesterNeedle stop down Ribbing with overlock seamRibbing with overlock seam Needle 100 Important facts about sewing computer needlesSewing computer, needle and thread Needle and threadNeedle and fabric Condition of needle Needles Needle table Description Needle point Suitable for StandardNeedle SpecialFeed-dog and stitch length Feed-dog and fabric feedThick fabrics feed-dog and sewing corners Feed-dog and fabric feed with compensating platesUneven layers Cleaning Disconnect plug Sewing lightReplacing the bulb Trouble shooting Presser foot lifter Quilt stitch IndexIndex Impressum