Bernina Sewing Machine manual Ribbing with overlock seam, Needle stop down

Page 41

Selected practical stitches: Overlock seams

41

Ribbing with overlock seam

Stitch: Vari-overlock No. 3

Needle: size and type suitable for the fabric selected (see p. 42)

Thread: cotton or polyester

Feed-dog:up (sewing position)

Presser foot: Overlock foot No. 2 or

Reverse pattern foot No. 1

Overlock foot No. 2 is specially designed for overlock stitches. The pin on the foot produces more thread in each stitch so that the elasticity of the seam is maintained.

Ribbing with overlock seam

for all fine cotton, synthetic and mixed fiber jersey

Preparation

•fold ribbing in half

•pin and baste to opening, right side outside

Sewing

•sew Vari-overlock over the raw edge

•guide the edge along the pin on the foot

Back view

Front view

TIP

Needle stop down

needle stays in fabric when you stop to adjust the ribbing

030595.50.04_0201_a125_EN

Image 41

Contents

Welcome to To reduce the risk of electric shock Important Safety InstructionsThis sewing computer is intended for household use only Front view Details of the sewing computer2330 Bobbin cover FHS connection Stitch plate AdjustmentThread take up cover Thread pathBack view Presser foot lifter Carrying handleManual Thread cutterStandard accessories AccessoriesStart-stop-unit Fabric coverFree standing accessory box Accessory boxStoring accessories Attaching the accessory box to the sewing computerPower cable Free-Hand-System FHS presser foot lifter* knee-operated Sewing tableWinding the bobbin Thread cutter Winding the bobbinBobbin case Changing the needle Inserting the bobbinInsert the bobbin Removing the needleSupplementary spool pin Changing the presser footChanging the presser foot sole Attaching the presser foot soleThreading the upper thread Thread cutter Bringing up the lower threadFeed-dog Stitch plateStitch plate markings Button below the handwheelThread tension Screen shows Main switch toGeneral instructions Stitch width Stitch* selectionNeedle position Stitch lengthClr/del clear/delete FunctionsNeedle stop Shorter stitch length Longer stitch length BalancePresser foot shaft Presser foot selection snap-on systemButtonhole sole Reverse pattern sole Overlock solePractical and decorative StitchesQuilting- and Decorative stitches ActivaStitches Gathering stitch Standard buttonholeDarning program Straight stitch Seam end Securing programSeam begin Oversewing edges C Zig-zag stitchSatin stitch Blind hem Fine stitch width adjustmentPreparation SewingDarning program TIP To sew around zipper pull ZippersSeam begin Zipper or fabric is thick or Densely wovenManual buttonhole Sewing a manual standard buttonhole Gimp Buttonhole with gimpFoot No Ideal cords With the seam ripper Special accessory Handlook quilt stitch Closed seam Vari-overlock seamKnits and jersey Sewing stretch fabricsDouble overlock No Double overlock seamCotton or polyester Overlock foot No or Reverse pattern foot NoNeedle stop down Ribbing with overlock seamRibbing with overlock seam Sewing computer, needle and thread Important facts about sewing computer needlesNeedle and thread Needle 100Needle and fabric Condition of needle Needle Needle table Description Needle point Suitable for StandardSpecial NeedlesFeed-dog and stitch length Feed-dog and fabric feedThick fabrics feed-dog and sewing corners Feed-dog and fabric feed with compensating platesUneven layers Cleaning Disconnect plug Sewing lightReplacing the bulb Trouble shooting Presser foot lifter Quilt stitch IndexIndex Impressum