![](/images/new-backgrounds/1041949/4194917x1.webp)
Setting up the sewing computer | 9 |
Accessory box**
D
F
GA
H
E
B
C
Free standing accessory box
•pull both feet out until they click into place
•stand box in chosen position
Storing accessories
Standard accessories are supplied in a plastic bag.
The box is equipped with one small and one large drawer (B and C) as well as com- partments for bobbin holders D and presser feet E. (Additional compartments and drawers are available as optional extras.)
•push the bobbins into the compartments provided
•to remove a bobbin, press the compart- ment holder F lightly
•insert the presser foot shaft into the slot E
•the
•the needle selection box can be stored in compartment G
Attaching the accessory box to the sewing computer
•close the doors
•push feet back into position
•attach the box to the sewing computer (catch A must engage); inserting
the presser foot lifter into the opening H Note: first lower the presser foot lifter!
Removing the accessory box
•press catch A on the top of the box
•remove box to the rear
** available as a special accessory
030595.50.04_0201_a125_EN