Pella 812W0100 Rough Opening Preparation, Setting and Fastening the Window

Page 3

1 ROUGH OPENING PREPARATION (continued)

E.Apply sill flashing tape #1. Cut a piece of flashing tape 12" longer than the opening width. Apply at the bottom of the opening as shown (1E) so it overhangs 1" to the exterior.

Note: The tape is cut 12" longer than the width so that it will extend 6" up each side of the opening.

F.Tab the sill flashing tape and fold. Cut 1" wide tabs at each corner (1/2" from each side of corner) (1F). Fold tape to the exterior and press firmly to adhere it to the water resistive barrier.

G.Apply sill flashing tape #2. Cut a piece of flashing tape

12" longer than the opening width. Apply at the bottom, overlapping tape #1 by at least 1". Do not allow the tape to extend past the interior face of the framing (1G).

Note: The flashing tape may not fully cover the framing members.

2 SETTING AND FASTENING THE WINDOW

A.Install and level sill spacers. Place 1" wide by 3/8" thick spacers on the bottom of the window opening 1/2" from each side.

Spacers are also required at points where windows are joined in multiple window applications. Add shims as necessary to ensure the spacers are level. Once level, attach spacers and shims to prevent movement.

Note: Improper placement of shims or spacers may result in bowing the bottom of the window.

1"

1E

6"

1/2"

1/2"

1F

1"

1G

2A

B.Remove plastic wrap and cardboard packaging from window. DO NOT remove plastic shipping spacers located between the window sash and frame. The shipping spacers will help keep the window square during installation. DO NOT unlock or open the window until it is fully fastened.

Note: If screens, grilles or hardware are removed from the window at this time, label them and store them in a protected area.

C.Fold out installation fin to 90°. Be careful not to remove or tear the fin corners.

Note: If the fin is not at 90°, the window will not line up correctly on the interior.

D.Curved Units with Fins:

2C

Curved Units with frame radius > 12" will be provided with fixed fin.

On windows with fixed extruded fin, drill 1/8" diameter holes in the fin every 12".

Fixed

Extruded Fin

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Part Number 812W0100 Bowed Rough Opening PreparationVerify the window will fit the opening Measure all four sides of the opening to makeSetting and Fastening the Window Rough Opening PreparationApply sill flashing tape #2. Cut a piece of flashing tape To hold the window in place while shimming it plumb Square Setting and Fastening the WindowPoints around the window Overlapping tape down, and press all tape down Integrating the Window to the Water Resistive BarrierRectangular Units Only Apply side flashing tape. Cut two pieces of flashingSheathing. On the short side of a Integrating the Window to the Water Resistive BarrierSealing the Window to the Exterior Wall Cladding Interior SealAdditional cutting patterns Sealing the Window to the Exterior Wall CladdingPella Care and Maintenance Important NoticeInterior Finishing Exterior FinishLock Lever Removal and Insertion Installing Roto Cover and Crank

812W0100 specifications

The Pella 812W0100 is a high-performance window that embodies innovative engineering and advanced technology, ensuring it meets the diverse needs of modern homeowners. Designed for both aesthetics and functionality, this product stands out as a premier choice for new constructions and renovations alike.

One of the primary features of the Pella 812W0100 is its energy efficiency. This window is equipped with advanced Low-E glass that reflects heat in the summer and retains warmth in the winter. This technology significantly enhances thermal insulation, helping to reduce heating and cooling costs throughout the year. The Pella 812W0100 also comes with multiple glazing options, allowing homeowners to customize their window’s energy performance according to their climate and specific needs.

In terms of durability, the Pella 812W0100 boasts a robust frame made from high-quality materials that resist warping, cracking, and fading. The window is constructed with a unique fiberglass and composite blend that provides long-lasting strength and stability, making it an excellent choice for areas with extreme weather conditions. Additionally, the window's exterior is designed to withstand harsh elements without compromising its appearance.

The design of the Pella 812W0100 offers versatility that caters to various architectural styles. Available in multiple colors and finishes, homeowners can choose options that seamlessly blend with their home’s exterior and interior decor. The window's sleek lines and large viewing area maximize natural light while providing unobstructed views of the outdoors.

For added convenience, the Pella 812W0100 features an easy-to-use locking system that enhances security without sacrificing style. The window operates smoothly, thanks to its precision-engineered hardware, ensuring long-term reliability.

Installation and maintenance of the Pella 812W0100 are also streamlined. This window is designed for easy installation, reducing labor costs and time spent during the building process. Furthermore, its low-maintenance exterior simply requires periodic cleaning to keep it looking fresh and new.

Ultimately, the Pella 812W0100 combines cutting-edge technology, energy efficiency, aesthetic appeal, and robust durability, making it an ideal choice for homeowners looking to enhance their living spaces while optimizing energy savings and security.
Top Page Image Contents