The Boot Console Interface
Displaying and Setting the Monitor Type
Setting the Monitor Type
Using the list in the example above, you can set the monitor type for graphics slot3 by typing the following:
Configuration Menu: Enter command > monitor graphics3
NOTICE:You can exit at this point by entering x, and the monitor type will not be changed.
The screen displays the choice of supported monitors, similar to the follow- ing. Follow the directions in the screen prompts and enter the monitor type you want to configure (in this example, number 2).
MONITOR INFORMATION |
|
| |
Type | Resolution | Frequency | |
1 | 1280x1024 | 72Hz |
|
2 | 1024x768 | 75Hz |
|
3 | 1024x768 | 70Hz |
|
4 | 1024x768 | 75Hz | Flat Panel |
5 | 1280x1024 | 60Hz |
|
6 | 1024X768 | 60Hz |
|
7 | 640X480 | 60Hz |
|
8 | 1280X1024 | 75Hz | VESA |
9 | 1024X768 | 75Hz | VESA |
10 | 800X600 | 75Hz | VESA |
11 | 640X480 | 75Hz | VESA |
12 | 1280X1024 | 72HZ | GrayScale |
13 | 1280X1024 | 50HZ |
|
Enter monitor type selection from list above (or ’x’ to exit): 2
2 1024x768 75Hz
Press <y> to save monitor type <x> to exit monitor selection: y
189