Using Your CD-ROM Drive

Operating the CD-ROM Drive

Unloading a CD-ROM Disc in a Horizontally Mounted Drive

Perform the following steps to unload a disc from the CD-ROM drive:

Figure 10

Removing a CD-ROM Disc From a Horizontally Mounted Drive

1Press the eject button to eject the disc tray from the drive. If the drive is in use, you must press the eject button form more than one second to eject the disc tray. The emergency eject feature allows you to eject the disc tray if the normal proce- dure fails. See Table 5.

NOTICE:You must unmount the disc before eject it from the drive. Refer to the subsection, “Unmounting a CD-ROM Disc Using SAM,” for instruction on unmounting a disc.

2Wait until the drive has fully ejected the disc tray, then remove the disc from the tray as shown in Figure 11. Be careful to touch only the edges of the disc.

3To close the Disc Tray, push the front of the disc tray gently towards the drive until it closes by itself.

47

Page 63
Image 63
HP C100/110 manual Unloading a CD-ROM Disc in a Horizontally Mounted Drive