HP C100/110 manual Accessing the Boot Console Interface

NOTICE:

NOTICES:

NOTICE:

The Boot Console Interface

Accessing the Boot Console Interface

Accessing the Boot Console Interface

To access the boot console interface, follow these steps:

This procedure should be done by a system administrator.

1Close any files and applications on your workstation.

2Press the power switch on the front panel of the system unit.

There is no need to manually shut down the HP-UX operating system on your workstation before powering it off. When you turn off the power switch, your workstation automatically shuts down the operating system before terminating the power.

Make sure that you do not unplug the system’s power cord or otherwise interrupt power to the system unit at this time.

3Power on your workstation.

If Autoboot is turned off, the boot sequence automatically stops at the boot console Main Menu.

If Autoboot is turned on, you will see the following messages:

Processor is starting Autoboot process. To discontinue, press any key within 10 seconds.

If you are using a power-saving monitor, you will have less than 10 seconds from the time this message appears to press a key.

4Press a key. You will then see the message:

Boot terminated

The Main Menu of the boot console appears.

180