Changing Your Workstation’s Hardware Configuration

Installing Storage Devices

Mounting the Storage Device Slides

From the accessory hardware kit which came with your workstation, locate two plastic storage device slides. Using the screws that came with the stor- age device, mount the slides on the new storage device so that the locking tabs are at the connector end of the drive, as shown in Figure 22.

Locking Tab

Figure 22

Mounting the Storage Device Slides

CAUTION:When mounting the storage device slides, only use the screws that shipped with the storage device. Use of other screws can cause physical damage to the device.

122

Page 138
Image 138
HP C100/110 manual Mounting the Storage Device Slides