Using Your Digital Data Storage (DDS) Tape Drive

Operating the DDS Tape Drive

Verifying the DDS Tape Drive Operation

To verify that your workstation can communicate with the DDS-format tape drive, if you are using HP-UX 9.05, enter the following:

/etc/ioscan -d scsi

After a few moments the ioscan utility returns a message similar to the fol- lowing:

H/W Path Description Status

======================================

2.0.1.3.0 tape_drive ok(nnnnnnnnn)

If you are using HP-UX 10.0, enter the following:

/usr/sbin/ioscan -d stape

After a few moments the ioscan utility returns a message similar to the fol- lowing:

H/W Path

Class

Description

============================================

 

bc

 

 

8

bc

I/O Adapter

8/16

ba

Core I/O Adapter

8/16/5

ext_bus

Built-in SCSI

8/16/5.3

target

 

 

8/16/5.3.0

tape

HP

HP35480A

If ioscan does not see your tape drive it will return the following message:

ioscan: No hardware found

If you receive this message, go to Chapter 6, “Solving Problems.”

72