SCSI Connections

 

 

 

 

 

 

 

Assigning SCSI Device IDs

Table 22

Single-Ended SCSI Device IDs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Device ID (Address) Number

 

 

 

SCSI Device Drives

 

(Only 0 through 6 Available)

 

 

 

 

 

 

Internal External

 

 

 

 

 

 

 

 

 

Internal System Drives:

 

 

 

 

 

 

System SCSI Drive(s)

 

 

 

 

 

 

 

CD-ROM Drive (if present, uses ID No.2)

 

__________

N/A

 

 

4-mm DDS Tape Drive

 

 

__________

N/A

 

 

(if present, uses ID No.1)

 

 

 

 

 

 

External Device Drives

 

N/A

__________

 

 

1st External Device

__________________

 

N/A

__________

 

 

2nd External Device

__________________

 

N/A

__________

 

 

3rd External Device

__________________

 

N/A

__________

 

 

4th External Device

__________________

 

N/A

__________

 

 

5th External Device

__________________

 

N/A

__________

 

 

6th External Device

__________________

 

N/A

__________

 

 

7th External Device

__________________

 

N/A

__________

 

 

 

 

 

 

NOTICE: You can have no more than 7 single-ended SCSI devices (internal and ex-

 

 

 

ternal) connected to the system.

 

 

 

 

 

 

 

 

 

 

 

 

 

5Write in the SCSI device ID of any internal drives in Table 22.

6Write in the type of external single-ended drives currently connected to your workstation under the heading “External Device Drives” and each drive’s SCSI device ID under the heading “Device ID.”

7Add your new drive to the table if it is an external device. If it is an internal drive, continue to Step 8.

NOTICE:The C1700A Magneto-Optical Autochanger uses three SCSI IDs, and accounts for three of the seven devices allowed on the SCSI bus

171