Setting Up Your Printer

Setting Up a Local Printer Using SAM

4A file manager window appears with a number of icons in it. Double-click on the System_Admin toolbox icon.

Figure 5

Opening the System_Admin Toolbox

5Move the mouse cursor to the SAM icon shown below (your icon can look like either of these) and double-click the left mouse button.

Figure 6

Executing the SAM Icon

6The System Administration Manager window opens. Double-click on Printers and Plotters ->.

7The Printers and Plotters window opens. Double-click on Printers/Plotters.

If your workstation doesn’t have any printers set up, a message window opens. Click on OK to remove it.

8From the Actions menu, click on Add Local Printer/Plotter.

9Another menu opens. If your printer is connected to the parallel port on your workstation, click on Add a Parallel Printer/Plotter.

If your printer is connected to one of the serial connectors on your workstation, click on Add Serial (RS-232C) Printer/Plotter.

A window opens displaying the available parallel or serial interfaces.

10If you chose Add Parallel Printer/Plotter in the previous step, only one parallel interface will be listed. Place the mouse cursor on the listed parallel interface and click the left mouse button.

31