Changing Your Workstation’s Hardware Configuration
Replacing the Main Tray Assembly
Replacing the Main Tray Assembly
Perform the following steps to replace the main tray assembly:
1Align the main tray assembly with the chassis and slide it into place, as shown in Figure 36.
Captive
Screws
| Captive Screws |
Figure 36 | Replacing the Main Tray Assembly |
2Slide the main tray in until you feel it make contact with the internal connectors.
3Push firmly and evenly on the main tray assembly to make sure that all connec- tors are fully seated.
4Tighten the four captive screws, as shown in Figure 36.
NOTICE:To maintain FCC/EMI compliance, verify that the main tray is fully seated and all four captive screws are completely tightened.
141