The Boot Console Interface

Displaying the Status of the EISA Slots

Displaying the Status of the EISA Slots

The eisa command lets you identify all EISA cards currently installed on your workstation by showing you the current status of your workstation’s four EISA slots. It is available only in the Information Menu.

To use the eisa command from the Information Menu of the boot console interface, type:

Information Menu: Enter command > eisa

The following table appears:

Slot #

Slot State

Device Information

-------

------------

--------------------

1

Empty

Empty

2

Unconfigured

HWP1850

3

Empty

Empty

In the table above, “Slot #” is the slot number as seen on the back of your workstation; “Slot State” is the current state of any card in each slot; and “Device Information” is the compressed EISA ID, read from the EISA card itself.

197