Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
Configuring a Hard Disk Drive
This section describes how to add a hard disk drive to your system as a file system using SAM. If you installed a new hard disk drive, follow these instructions to make your new disk usable as a file system. For more information about configuring a hard disk drive, refer to the System Administration Tasks manual.
This procedure requires you to log in as root. If you cannot log in as root, contact your system administrator.
1Log in as root.
2Move the mouse pointer to the arrow above the Toolbox control and click the left mouse button.
Toolbox Control Arrow
3The Toolbox subpanel opens. Click on the General toolbox icon, shown below.
136