HP C100/110 manual Fast, Wide Differential Scsi IDs

SCSI Connections

Assigning SCSI Device IDs

8Check to see which SCSI device IDs are not used. You may use ID numbers 0 through 6 if they are not already in use. If the default ID on your drive does not conflict with any existing drive IDs, use that ID. If your default address conflicts with an existing drive ID, you need to assign a new SCSI device ID to your drive. Refer to the drive’s installation documentation for information on changing the device ID.

CAUTION:Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus controller.

CAUTION:

Table 23

Fast, Wide Differential SCSI IDs

Before assigning a SCSI device ID to your drive, you need to check your SCSI device IDs. To check which SCSI device IDs are available and assign an ID to your device, follow these instructions which use Table 23.

1Write in the type of internal drives currently connected to your system under the heading “Fast, Wide Differential SCSI Device Drives” and each drive’s SCSI de- vice ID under the heading “Device ID.”

2Add your new drive to the table.

3Check to see what SCSI device IDs are not used. You may use ID numbers 0 through 6 and 8 through 15 if they are not already in use. If the default ID on your drive does not conflict with any existing drive IDs, use that ID. If your default address conflicts with an existing drive ID, assign a new fast, wide differential SCSI device ID to your drive. Refer to the drive’s installation documentation for information on changing the device ID.

Do not use SCSI device ID 7 for any device.

Fast, Wide Differential SCSI Device Drives and Device ID

Fast, Wide Differential SCSI Device Drives	Device ID (Address) Number
	(ID 7 not available)

1st Internal Device	______________________________	6
2nd Internal Device	______________________________
		5

NOTICE: You can have no more than 15 SCSI devices connected to a fast, wide bus.

172